Oki PRO8432WT Pro8432WT - User Guide

Oki PRO8432WT Manual

Get Oki PRO8432WT PDF manuals and user guides View all Oki PRO8432WT manuals
Add to My Manuals
Save this manual to your list of manuals

Oki PRO8432WT manual content summary:

  • Oki PRO8432WT | Pro8432WT - User Guide - Page 1
    Pro8432WT - 1 -
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 2
    and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. written permission from Oki Data Corporation before doing any of the above. © 2017 Oki Data Corporation OKI is a registered trademark of Oki Electric Industry Co.,
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 3
    ●●Emergency first aid Take care with toner powder: If swallowed, give small amounts of cold water and risk of staining skin or clothing. ●●Manufacturer Oki Data Corporation, 4-11-22 Shibaura, Minato-ku, Tokyo 108-8551, Japan For all sales, support and general enquiries contact your local distributor.
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 4
    the power cord and contact a customer service center if the cover is unusually hot, smoking, giving off an unusual odor, or making strange noises. Failure to do so may lead to a fire. Do not operate and/or disassemble the printer other than as directed in User's Manual. Doing so may cause electric
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 5
    Basic operations are described to aid understanding of this printer. The initial setup descriptions including printer placement and the network initial setting are noted along with troubleshooting and maintenance procedures. ●●About This Manual Terms in this document The following terms are used
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 6
    be used in this manual. ●● PostScript3 Emulation 10.11 is used as OS X, and Pro8432WT is used as the printer for examples in this document. Depending on Printer" substance emission certification criteria. (Toner was tested by performing black and white and color printing with Oki Data genuine toner
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 7
    representative 3 Environmental information 3 For Your Safety 4 Manual Composition 5 About This Manual 5 1. Setup 10 Checking Products 11 Checking Package 16 Placement Environment 16 Placement Space...16 Preparing Your Printer 17 Unpacking...17 Installing Consumables 17 Loading Paper...19
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 8
    Supported Paper 45 How to Print from the Tray 48 How to Print from the MP Tray 49 Printing in Custom Power Off Mode 63 Setting the Buzzer 64 3. Troubleshooting 65 When an Error Message Appears on the Display 82 Unable to Install a Printer Driver Successfully 84 OS-Specific Constraints 85 Image Quality
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 9
    Toner Cartridges 93 Replacing the Image Drum 97 Replacing the Belt Unit 100 Replacing the Fuser Unit 103 Cleaning 105 Cleaning the Surface of the Printer Your Printer 109 Before Machine Disposal 112 5. Appendix 113 Menu List of the Operator Panel 113 Checking the Printer's Status
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 10
    /off the power ●● Installing options ●● Test printing from the printer 4. Connecting to a Computer Connecting through network For Windows For on the operator panel Connecting a cable Installing a printer driver on a computer Adding printers on a computer Test printing from a computer Adding
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 11
    and cushioning material are needed if transporting the printer. Do not throw them away. ●● Four image drums (cyan, yellow, magenta, white) Note ●● The image drums are installed in the machine before shipment. ●● Four starter toner cartridges (cyan, yellow, magenta, white) ●● Quick Guide - 11 -
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 12
    > button button Ten-key pad key key indicator indicator Function Displays operating instructions and the status of the printer. Switches between on line and off line modes. Cancels the current print immediately. ●● Displays the menu screen. ●● Confirms
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 13
    202 Auto Power Off Time 210 Error Report 220 Print Position Adjust (MPTray) 221 Print Position Adjust (Tray 1) 231 Paper Color Setting 233 Trans. Color Setting 234 SMR Setting 235 BG Setting 236 Drum Cleaning 237 Hex Dump 300 Adjust Density 301 Adjust Registration 302 Print
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 14
    11 10 9 15 14 No. 9 10 11 12 13 14 15 Name Output tray open button Toner cartridge Image drum (C: cyan) Toner cartridge Image drum (Y: yellow) Toner cartridge Image drum (M: magenta) Toner cartridge Image drum (W: white) Fuser unit LED head (four heads) 18 19 21 20 No. 18 19 20 21 Rear output
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 15
    Available Options The following options are available for your printer: ●● Additional RAM (256 MB or 512 MB) ●● 16 GB SD memory card kit ●● Wireless LAN module Reference ●● For details on how to install the options,
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 16
    not place directly on a rug or carpet with long strands. ●● Do not install in a closed room with poor ventilation and circulation. ●● If you use the printer in a small room for a long time, please make sure that you ventilate the room. ●● Install away from strong magnetic fields and sources of noise
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 17
    because it weighs about 37 Kg or 40 Kg. Note ●● Be sure to use the consumables or maintenance units provided with this printer at first. Otherwise, the life of the consumables or maintenance units may not be displayed correctly, or you may not be able to use them
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 18
    Preparing Your Printer 4 Remove the protective sheets and toner 1 covers from four image drums. x4 (C / Y / M / W) 5 Confirm that the image drum and the toner cartridge are of the same color, and then attach the toner cartridge to the image drum. 1. Setup - 18 -
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 19
    6 Put all four image drums back into a printer. Preparing Your Printer Loading Paper 1 Reference ●● Please refer to "Supported Paper" P.45 for information on how to load paper into the printer. 1 Pull out the paper tray (1). 1. Setup 7 Close the output tray (4) by pushing the both sides of
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 20
    edges of the paper stack on a level surface. 6 Secure the loaded paper with the paper guide. 7 Check if a size of loaded paper matches the setting of paper size dial. 8 Return the paper tray to the printer. Memo ●● If loading a paper that you cannot select the size with a paper size dial options
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 21
    ground terminal. Do not use the power cord for other product for the printer. ●● Do not use an extension cord. When you use it unavoidably, use more than rated 15 A. ●● Use of an extended code may not operate a printer normally by AC voltage descent. ●● During printing, do not shut off a power
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 22
    turns off printer forcibly. Only perform this procedure when a problem occurs. For printer problems, refer manually by pressing the button on the operator panel. The button lights up green while in this mode. 1 „„When the Printer is Not Used for a Long Time When the printer
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 23
    driver. Refer to "When Adding Options" P.44. Installing Additional RAM Install additional RAM to increase the memory capacity of your printer in cases such as if memory overflow or the collate print errors occur. Your printer supports 256 MB and 512 MB RAM. Note ●● Use only genuine Oki Data
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 24
    the recess of the metal plate (2), and slide it upward. 5 Insert the additional RAM (4) into the slot and fix it by pushing it toward the printer. Note ●● Be sure to check a direction of an additional RAM. The additional RAM has small dents on its connector, which are fitted with a connector of
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 25
    the scroll button several times to select [RAM] and press the button. 1. Setup 1 8 Plug the AC cord and Ethernet or USB cable into your printer, and then turn on the power switch. 9 Press the scroll button or on the operator panel. 10 Press the scroll button to select [Configuration] and
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 26
    attached to the SD memory card. Note ●● Use only genuine Oki Data products. The performance cannot be guaranteed when using other products. for accidental overwriting locked. Make sure to release the lock. 1 Turn off your printer, and then unplug the AC cord and Ethernet or USB cable. Reference ●● "
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 27
    the lower part of the 1 metal plate (2), slide the metal plate downward and secure it. 2 1. Setup 5 6 Install the SD memory socket to the printer with the screw (6) and tab (7) for the SD memory card socket and attach the connector (8). 8 Close the access cover (1). 8 7 6 7 Install the metal
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 28
    ●● [15 GB] may be displayed in [SD Card]. This is not an error. ●● If the value of [SD Card] has not increased, turn off your printer and unplug the AC cord and Ethernet or USB cable, and then reinstall the SD memory card. 15 Press the button. - 28 -
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 29
    Printer Test Printing from the Printer 1 Check that you can print with the printer. Check the detailed settings and status of your printer by printing the contents of the settings (Menu Map). Note ●● When a printer on your printer while pressing printer settings, a setup for printing from a printer
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 30
    and install a printer driver software using the provided "Software DVD-ROM". Prepare a computer with a DVD drive. „„Connection Method You can select either of the following connection methods: ●● "Network Connection" P.31 ●● "USB Connection" P.41 „„Product Requirements Your printer supports the
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 31
    Connecting an Ethernet Cable Be sure to connect your printer to a network with an Ethernet cable before driver installation. 1 Prepare an Ethernet cable (1) and using a wired LAN or a USB connection to print large amounts of data, such as photographs. „„To choose a valid default gateway 1 Press the
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 32
    and then press the button. 9 The Printer starts searching for wireless LAN access points. During 2 minutes the wireless LAN access point does not support WPS, you can connect by selecting the SSID and encryption key by referring to the user manual of the wireless LAN access point. Memo ●● The
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 33
    write down the SSID, the encryption method and the encryption key by referring to the user manual of the wireless LAN access point. Note ●● When the encryption method is WPA-EAP or WPA2EAP, configure from the printer's web page. Memo ●● The SSID is also called the network name, ESSID, or ESS-ID
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 34
    set IP addresses for the printer, and then install a printer driver on the computer. If there is no DHCP server or BOOTP server on the network, you need to manually configure the IP address on the computer or printer. If your network administrator or internet service provider specifies an unique IP
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 35
    on the printer. 2 Press the button on the operator panel. Connecting to a Computer 1 7 Press the to select [IP Address Set], and press the button. 1. Setup 3 Press the scroll button to select [Admin Setup], and press the button. 8 If setting the IP address manually, press
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 36
    1. Setup Connecting to a Computer 10 Enter the IP address using the numeric 1 (0-9) keys, and press the button. To move to the next box, press the button. 14 Enter the default gateway address and press the button. To move to the next box, press the button.
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 37
    , and then click [Next]. Installation starts. Memo ●● The following software is installed. -- PS Printer Driver (Including Network Extension and Color Swatch Utility) ●● Install other software from Custom Install 8 Make sure that the software is successfully installed, and then click [Printing Test
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 38
    menu. 7 Click [Printers & Scanners]. 9 Click [Default]. 10 Select the machine where [Kind] is [Bonjour], and then select [Oki Pro8432WT PS] from the [Use]. Connection Priner Name Kind Network OKI-Pro8432WT (last 6 digits Bonjour of MAC address) USB OKI DATA CORP Pro8432WT USB Memo ●● To
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 39
    [Printers] and [Pro8432WT PS] is displayed for [Kind]. Note ●● If [Pro8432WT PS] is not displayed for [Kind] correctly, click [-], delete the machine from [Printers], and , confirm that the wireless device you are using supports the following environment. Item Standard Security Value IEEE 802.11 b/g/n
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 40
    etc.) supports WPS-PBC (push button), then you can use the WPS button to connect via wireless (AP mode). Follow the procedure below to connect. 1 Confirm the position of the WPS button in the user's manual provided with the wireless terminal (computer, tablet, smartphone, etc.) 2 Turn on the printer
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 41
    via USB. Connecting a USB Cable 1 Prepare a USB cable (1). A USB cable is not supplied with your printer. Prepare a USB 2.0 cable separately. 1 Connecting to a Computer Installing a Printer Driver (For Windows) 1 1. Setup Note ●● You must be logged in as an administrator to complete this
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 42
    software is installed. -- PS Printer Driver (Including Color Swatch Utility) ●● Install other software from Custom Install. 8 Make sure OKI] icon on the desktop. 4 [Drivers] > Double-click [Installer for OSX]. 5 Enter the administrator password, and then click [OK]. Follow the on-screen instructions
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 43
    Name Kind Network OKI-Pro8432WT (last 6 digits Bonjour of MAC address) USB OKI DATA CORP Pro8432WT USB Memo ●● To change the name, enter a new name into [Name:]. Note ●● If [Pro8432WT PS] is not displayed for [Kind] correctly, click [-], delete the machine from [Printers], and then newly
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 44
    procedures to change printer driver settings. „„For Windows PS Printer Driver 1 Click [Start] > [Devices and Printers]. 2 Right-click the [Pro8432WT] icon and then select [Printer Properties]. (If you have installed multiple printer drivers, select [Printer Properties] > [Pro8432WT PS].) 3 Select
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 45
    beforehand to make sure that there are no problems. Your printer supports the following types of paper. Paper Type Plain 260 mm) 184 x 260 16K (195 x 270 mm) 195 x 270 16K (197 x 273 mm) 197 x 273 Custom Size Width: 64 - 297 Length: 90 - 431 Index card 76.2 x 127 (3 x 5) Photo (4 x 6 inch)
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 46
    Operation Supported Paper kg) ●● This printer cannot print on an ink. Use paper that meets the following conditions*2: ●● A pigment or an ink used to color paper is heat the ink must not offset when exposed to the high fuser temperatures used in the printing process. CAUTION ●● Envelopes should
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 47
    printer has two built-in trays (tray 1 and the MP tray). Refer to the list below to check the supported paper and capacities of each tray. Tray Supported mm) ●● Index Card ●● Photo (4 x 6 inch) ●● Photo (5 x 7 inch) ●● Custom Size ●● 100 sheets (when paper weight is 80 g/m2) ●● Light (64 to 82 g/
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 48
    (4) to the size of paper to be loaded. 4 3 6 Secure the loaded paper with the paper guide. 7 Check if a size of loaded paper matches the setting of paper size dial. 8 Return the paper tray to the printer. Memo ●● If loading a paper that you cannot select the size with a paper size dial options, set
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 49
    the paper set cover (5). 5 2. Printing Basic Operation 5 Adjust the manual feeding paper guide 1 2 (6) to the width of paper to be loaded. 2 Pull out the paper support (3) by holding 6 the center part of it. 3 3 Unfold the sub support (4). 6 Insert the paper with the print side face up
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 50
    side of paper on which other printer has printed. ●● Curling of a postcard or an envelope may cause the ink absorbing problem. Use paper that is not [Custom] is selected for [Paper Size], you need to register the custom size. For how to register the custom size, refer to "Printing in Custom Sizes
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 51
    button. 17 Press the button to exit the menu mode. How to Print from the MP Tray For Windows PS Printer Driver 1 From the [File] menu, select [Print]. 2 Click [Preferences] or [Properties]. 3 Select the [Paper/Quality] tab. 2 2. Printing Basic Operation 4 Select [Multi-Purpose Tray
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 52
    to select [Tray Config] of the paper tray in which you loaded paper and then press the button. Note ●● [Custom] is displayed only when [Paper Size] is set to [Custom]. 1 Press the scroll button or on the operator panel. 5 Check that [Paper Size] is selected and press the button
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 53
    LINE> button to exit the menu mode. 2 14 Specify a custom in the following procedures. For Windows PS Printer Driver 1 Click [Start] and select [Devices and Printers]. 2 Right-click the Your Printer icon and select the type of driver you want to specify from [Printing preferences]. 3 On the [Layout
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 54
    2. Printing Basic Operation Printing in Custom Sizes For OS X PS Printer Driver Note ●● In the OS X printer driver, paper size out of the available range can be set, however, image is not correctly printed. set paper size within available range. 2 1 Open the file
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 55
    Check that the rear output tray (1) on the rear side of the printer is closed. If the rear output tray is open, paper is always outputted to the rear output tray. 2 Unfold the paper support (2). 2 1 Memo ●● Open the paper supporter (2) so that the printed papers do not fall down from the output
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 56
    Convenient Print Functions The following convenient print functions are available. For details, refer to the User's Manual (Advanced). 2 „„Printing on Custom Size Paper You can register customized paper sizes to the printer driver so you can print on nonstandard paper such as banners. ● Printing on
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 57
    cancel printing, select [Yes] and then press the button. To proceed to printing, select [No] and then press the button. If a printer is not operated for about 3 minutes while this message appears, the message will go out and printing proceeds. Canceling Printing 2 2. Printing Basic
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 58
    Setting the Time that Elapses Before Entering the Power Save Mode ●●Setting the Time that Elapses Before Entering the Power Save Mode Note 2 ●● When a printer is in the power saving mode, press the button to restore from the mode. ●● Check if the message "Ready To Print" appears
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 59
    Setting the Time that Elapses Before Entering the Deep Sleep Mode ●●Setting the Time that Elapses Before Entering the Deep Sleep Mode Note ●● When a printer is in the deep sleep mode, press the button to restore from the mode. 2 ●● Check if the message "Ready To Print" appears. If
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 60
    may not enter the deep sleep mode if an error is displayed. 2 Printer Driver Utility Constraints When the printer goes into the deep sleep mode, the following constraints apply to the printer driver and utility functions. When the printer goes into the deep sleep mode, press the button
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 61
    apply to network functions. „„Does Not Enter the Deep Sleep Mode In the following cases, a printer will not enter the deep sleep mode. ●● IPSec is enabled. ●● A TCP connection is PnP-X ●● UPnP ●● MIB* * You can reference through some supported MIB in the deep sleep mode (Get command). - 61 -
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 62
    Settings for Turning Power Off Automatically (Auto Power Off) ●●Settings for Turning Power Off Automatically (Auto Power Off) Note 2 ●● In the factory default, a printer does not enter the auto power off mode while connecting to the network. Setting the Auto Power Off To enable the auto power off
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 63
    Setting the Time that Elapses Before Entering the Auto Power Off Mode Note ●● When a printer is in the power saving mode, press the button to restore from the mode. ●● Check if the message "Ready To Print" appears. If
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 64
    2. Printing Basic Operation Setting the Buzzer ●●Setting the Buzzer You can set the buzzer volume when a paper jam occurs. 1 Press the scroll button or on the 2 operator panel. 5 Press the scroll button several times to select [Buzzer Setup], and press the button. 2 Press the scroll
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 65
    3. Troubleshooting This chapter provides solutions to the problems you may encounter while operating your printer. Memo ●● Meanings of symbols in error messages: -- "%COLOR%" indicates Cyan (C), Magenta (M), Yellow (Y) or White (W). -- "%TRAY%" indicates tray 1 or the MP tray. -- "%COVER%"
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 66
    Even After Jammed Paper is Removed When paper is jammed inside a printer or when an error message does not disappear even after jammed paper HELP> button is pressed Error Code Scroll display upward ×××× 3. Troubleshooting Status Paper jams Paper jams Scroll display downward Message on the
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 67
    page 72 637 page 71 3 638 page 68 639, 640 page 69 3. Troubleshooting Error Code 380, 401, 637 A paper jam has occurred around the front cover. 1 Insert your finger into the recess on the right side of the printer and pull the front cover open lever (1) to open the front cover (2) forward
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 68
    Troubleshooting When Paper Jams Occurs/When an Error Message does not Disappear Even After Jammed Paper is Removed Error Code 381, 638 A paper jam has occurred under an image drum. 1 Insert your finger into the recess on the right side of the printer release levers (5) on the fuser unit if an edge
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 69
    382, 383, 639, 640 A paper jam has occurred around the fuser unit. 1 Insert your finger into the recess on the right side of the printer and pull the front cover open lever (1) to open the front cover (2) forward. 3 3. Troubleshooting 7 Close the output tray (4) by pushing the both sides of the
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 70
    paper so that the image drums are not exposed to light. 7 Hold the fuser unit handle (6) and lift the fuser unit out of the printer. 6 5 Remove the jammed paper remaining inside of the unit. 8 Lift the release levers (7) on the fuser unit, and pull out the jammed paper forward gently. 7 - 70 -
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 71
    4 3 10 Push the left lock lever (5) of the fuser unit backward. 5 13 Close the front cover (2). Note ●● Cannot close the front cover securely if the output tray is not closed. 3. Troubleshooting 11 Return all four image drums into the printer carefully. 2 Task is complete. Error Code 390, 637
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 72
    3. Troubleshooting When Paper Jams Occurs/When an Error Message does not Disappear Even After Jammed Paper is Removed 2 Insert your finger into the recess on the right side of the printer and pull the front cover open lever (2) to open the front cover (3) forward. 5 If loading paper on MP tray,
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 73
    front cover open lever (2) to open the front cover (3) forward. 1 2 Remove the jammed paper. 3 2 3 5 Close the front cover (3). 3. Troubleshooting 3 Return the tray (1) to the printer. 3 Task is complete. Memo ●● Open and close the front cover after removing the jammed paper otherwise the error
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 74
    3. Troubleshooting When the Message for Replacement of Consumables or Maintenance Unit Appears ●●When the Message for Replacement of Consumables or Maintenance Unit Appears When the time
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 75
    or maintenance unit appears. 1st Line xxx - page 93 3. Troubleshooting 2nd Line %COLOR% Toner Empty 1st Line xxx - page 93 2nd Line %COLOR% Toner Empty 1st Line Install Toner 410, 411, 413 page 95 (White toner) 2nd Line %COLOR% 412 page 93 Image Drums 1st Line xxx - Prepare new
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 76
    103 354 page 103 You can continue to print by opening or closing the front cover for a while. However replace the fuser unit soon. Otherwise, it may cause a printer error or paper jam. - Prepare a belt unit, and replace the old belt unit with new one after a message for replacement of
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 77
    settings specified in the printer driver, the message " Change Paper..." or "Check Paper..." appears on the display screen and the indicator blinks. Check the message and deal with the problem remedy. 3. Troubleshooting Display Screen match print data. Paper Size
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 78
    3. Troubleshooting Other Error Messages ●●Other Error fuser unit is not correctly installed. Install the fuser unit correctly in a printer. Blinks Blinks Blinks Blinks Blinks Blinks Writing of message data to be uploaded to a printer has been failed. The toner cartridge of the indicated color
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 79
    (M) 342 : Cyan (C) 343 : White (W) An error has occurred inside the printer. The printer is restarted. 1-digit error code appears. A code number changes according to an error. Something is wrong with the toner sensor of the indicated color or the image drum is not installed correctly. Install the
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 80
    :nnnnnnnn LR:nnnnnnnn FR:nnnnnnnn Blinks A fatal error has occurred in a printer. Write down the indicated alphanumerical characters and contact your dealer. 709 Caution, unknown Consumable detected Go to User Manual "Trouble Shooting" to restore operation Blinks You can use any consumables in
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 81
    3. Troubleshooting When You Cannot Print from the MP Tray ●●When You Cannot Print from the MP Tray If you print from the MP tray without moving down the paper set cover, the message "Install Paper MPTray" appears on the display screen. Check the message and deal with the problem. Refer to "How to
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 82
    default printer. Set the printer as the default printer. The output port for the printer driver is Select the output port to which the Ethernet or USB incorrect. cable is connected. A print job from another interface is in progress. Wait until the print job is done. "Received invalid data" is
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 83
    page 41 page 41, page 42 „„For Windows Cause Remedy The printer is off line. Right-click the OKI Pro8432WT icon, and then select [See what's printing] ([OKI Pro8432WT*] when multiple printer drivers are installed). In the dialog box, select the [Printer] menu and then remove the check from [Use
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 84
    3. Troubleshooting Other Issues Unable to Install a Printer Driver Successfully Memo ●● If the following information does not solve the issue, contact your dealer. ●● For issues caused by an application, contact the manufacturer of the application. USB Connection Problems 3 „„For Windows Cause
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 85
    Gamma Adjuster Symptom Cause/Remedy [Help] is not displayed. The [Help] function is not supported on PS printer drivers. The [User Account Control] When you launch an installer or utility, the [User completed), make sure to click [This program installed correctly]. 3. Troubleshooting - 85 -
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 86
    or dry. [Paper Color Setting] is improperly configured. [Trans. Color Setting] is improperly configured. Change the toner save settings. Install the toner cartridge properly. Replace the toner cartridge. Use paper stored in proper temperature and humidity conditions. Use supported paper. Press the
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 87
    fuser unit. page 103 3 3. Troubleshooting The image drum has been exposed Place the image drum back into to light. the printer and leave it for a few hours. If that does not solve the problem Use thinner paper. - The toner is low. Replace the toner cartridge. page 93 Periphery of
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 88
    is set to [Disable]. Remedy Replace the toner cartridge. Do color matching from the printer driver. Press the scroll button or and select [ it with new paper. Use supported paper. page 45 page 45 The background of a printed page is dark or dirty. The printer may be malfunctioning. Contact your
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 89
    the paper tray and select - into the printer. printer driver is not correctly the correct tray in [Source] in the specified. printer driver. You have specified manual feeding on the printer driver. In the printer driver, clear the [Use MP tray as manual feed] check box on [Paper feed options
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 90
    Ethernet or USB cable. The printer does not support your Ethernet or USB cable. Something may be wrong with the printing function. The interface is disabled. The printer driver of the printer is not selected. The specified port of the printer driver is wrong. The printer is in the deep sleep mode
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 91
    may be cleaning the image drum. The printer is adjusting the temperature of the fuser unit. Wait for a while. Wait for a while. - - 3 The printer is processing data from Wait until the process finishes. - another interface. 3. Troubleshooting A print job has As a result of processing
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 92
    amounts of water to weaken the toner. Follow the doctor's direction if necessary. Keep a used toner cartridge in a bag so that the toner powder can not fly upward. Note ●● Use only genuine Oki Data consumable items to ensure optimum quality. ●● Service for problems due to use of consumable items
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 93
    the "%COLOR% Toner Empty" appears and printing is stopped, replace the toner cartridge. Note ●● The actual life of the toner cartridge differs Y (yellow) Toner Cartridges)" P.95. 1 Prepare a new [C] toner cartridge. 2 Insert your finger into the recess on the right side of the printer and pull the
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 94
    to the paper feeding area inside the printer, wipe it off with a wet cloth that has been well wrung. 4 4 7 Insert a new toner cartridge (6) by aligning its left side indentation (7) with the protrusion (8) on the image drum so the toner cartridge and image drum [C] color label align. Then fix the
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 95
    cartridge, refer to "Procedure for Replacement (for C (cyan) Toner Cartridge)" P.93. 1 Prepare new toner cartridges. 2 Insert your finger into the recess on the right side of the printer and pull the front cover open lever (1) to open the front cover (2) forward. 4 4. Maintenance 1 2 3 Press
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 96
    pressing the top of the 4 cartridge to unlock. 8 Remove the tape (8) from the toner cartridge. 8 6 6 Lift the toner cartridge (7) from right side, and remove it from the printer. WARNING Possible to get burned. ●● Do not throw a used toner cartridge in the fire. They may explode, and the
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 97
    , do not leave it for more than 5 minutes. ●● In order for the printer to exhibit its full performance, please use genuine Oki Data consumables. ●● Service for problems due to use of consumable items other than genuine OKI consumables will incur fees even in the warranty period or the maintenance
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 98
    4. Maintenance Replacing Consumables and Maintenance Units ●● There is one toner cartridge for each color on the image drum. 1 Prepare a new image drum. 2 Insert your finger into the recess on the right side of the printer and pull the front cover open lever (1) to open the front cover (2) forward.
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 99
    cartridge backward until its top aligns on the mark. 9 Remove the toner cover (10). 10 7 4 12 Check a label color of a new image drum (9) and place the drum into a printer. 9 4. Maintenance 10 Insert the toner cartridge (8) taken out in step 7 to the image drum (9) by aligning its left side
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 100
    ). Even under the normal interior light, do not leave it for more than 5 minutes. 1 Prepare a replacement belt unit. (5) Put the image drum back to the printer. (6) Close the output tray by pushing the both sides of the cover firmly. (7) Close the front cover. 2 Turn off your
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 101
    tray open button (3) and open the output tray (4). CAUTION Possible to get burned. ●● The fuser unit is extremely hot. Do not touch it. 3 4 7 Turn the blue locks (5) Take all the four image drums out of a printer, and then place them on a flat surface. 8 Remove the belt unit by holding the blue lever
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 102
    and Maintenance Units 9 Hold the handle of a new belt unit with one hand and support lower part with other hand. Place the belt unit into the printer. 11 Return all the four image drums to the printer. 4. Maintenance 4 12 Close the output tray (4) by pushing the both sides of the cover
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 103
    ). Even under the normal interior light, do not leave it for more than 5 minutes. 1 Prepare a new fuser unit. Replacing Consumables and Maintenance Units 3 Insert your finger into the recess on the right side of the printer and pull the front cover open lever (1) to open the front cover (2) forward
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 104
    . 6 9 Close the output tray (4) by pushing the both sides of the cover firmly. 4 4 7 Hold the fuser unit handle (6) and place the fuser unit into the printer. 6 10 Close the front cover (2). Note ●● The front cover cannot be closed if the output tray is not closed securely. 8 Push back the
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 105
    occurring even after cleaning the paper feed rollers. For Tray 1 1 Pull out the tray (1). 3 5 Load paper in the tray. 6 Push the tray back into the printer. For MP Tray 1 Open the MP tray (1) forward by inserting your fingers into the front recesses (2). 2 2 1 1 - 105 -
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 106
    the MP tray. Wipe the two separation roller (8) with a wet cloth that has been wrung out well. 8 7 1 4 Open the paper set cover (5) until touching the printer. 5 7 Close the separation roller cover (7). 7 8 Lower the paper set cover (5). 5 - 106 -
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 107
    normal interior light, do not leave it for more than 5 minutes. 1 Turn off your printer by pressing the power switch. 4 Reference ●● "Turning Off the Power" P.22 2 Insert your output tray (4). CAUTION Possible to get burned. ●● The fuser unit is extremely hot. Do not touch it. 3 4 1 - 107 -
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 108
    4. Maintenance Cleaning 4 Lightly wipe the lenses (5) of the LED heads with soft tissue paper. 5 4 5 Close the output tray (4) by pushing the both sides of the cover firmly. 4 6 Close the front cover (2). Note ●● The front cover cannot be closed if the output tray is not closed securely. 2 - 108 -
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 109
    are needed to lift the printer safely because it weighs about 37 Kg or 40 Kg. CAUTION Possible to get burned. ●● The fuser unit is extremely hot. Do light, do not leave it for more than 5 minutes. 1 Turn off your printer by pressing the power switch. Reference ●● "Turning Off the Power" P.22 2
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 110
    (5). 10 Close the front cover (2). Note ●● The front cover cannot be closed if the output tray is not closed securely. 5 8 Return all the toner cartridges and image drums to the printer. 2 11 Remove the optional additional tray unit from the main unit if it is installed. 4. Maintenance - 110 -
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 111
    12 Protect your printer with packing materials. 13 Lift your printer and put it in a box. Note ●● Use the packing materials attached to your printer when purchased. ●● After transporting or when setting up again, remove the vinyl tape used to secure the image drum and toner cartridges. Moving or
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 112
    2 Press the scroll button to select [Admin Setup], and press the button. 3 Input the admin password. 4 Select [Others Setup] > [Erase Privacy Data]. 5 Once [Are You Sure?] is displayed, select [Yes], and press the button. 6 Once [Would you like really?] is displayed, select [Yes
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 113
    's Status with the Display Screen From the button on the operator panel, you can check the status of your printer. 5 Checking the Device Status You can check the residual life of the consumables, counter information, network settings and system information on the display screen. 1 Press
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 114
    Color Supplies Life Cyan Toner (n.nK) Magenta Toner (n.nK) Yellow Toner (n.nK) White Toner (n.nK) Cyan Drum 5 Magenta Drum Yellow Drum White Drum Belt Fuser Version RAM Flash Memory SD Card Date and Time Printer Name Short Printer Name Enabling Default Gateway (When Wireless LAN is
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 115
    (4 hours) Silent Mode (On) Clearable Warning (ONLINE) Auto Continue (Off) Manual Timeout (60 seconds) Timeout InJob (40 seconds) Timeout Local (40 seconds) Timeout Network (90 seconds) Low Toner (Continue) Print Mode w/o Color Toner (Alarm) Jam Recovery (On) Error Report (Off) Hex Dump F200 F201
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 116
    for (2 hours) Job Limitation (Disable) Verify job password (Off) Job Auto Search (On) Color Setup CMY 100% Density (Disable) Panel Setup Near Life Status (Enable) Near Life LED (Enable) Idle Display (Toner Gauge) Panel Contrast (0) Buzzer Setup Paper Jam Error Buzzer Volume (Off) Time Setup
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 117
    Near Life Timing (3000) Fuser Near Life Timing (2500) Belt Near Life Timing (2000) 5. Appendix Erase Privacy Data Business Phone Setup Business (0) Yellow Density (0) White Density (0) F310 F311 F312 F313 Print Color Tuning Pattern F302 Cyan Tuning Highlight (0) Mid-Tone (0) Dark (0)
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 118
    AP Mode User Setting (Don't disclose use) IP Address Set (Auto) IPv4 Address Subnet Mask Gateway Address DHCPv6 (Disable) WPS-PBC WPS-PIN xxxxxx ...... Manual Setup SSID Security WEP Key WPA Encryption Type WPA Pre-Shared Key Execute SSID Password IPv4 Address Execute Boot Menu : You must input
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 119
    Number N35100A, N35100B Specifications „„General Specifications Pro8432WT CPU PowerPC464FP, 800 MHz Memory (Maximum -TX/1000BASE-TX Display Graphics panel 60(W) x 32.6(H) mm, 128 x 64 dots Supported OS ●● Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows Server 2016
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 120
    5x7inch, index card (3 x 5 inch), custom size, 8K (260 x 368 mm, 270 x 390 mm, 273 x tray 1 and MP tray Manual feeding from MP tray Paper color Print Quality Assured Range Temperature 17 to 27°C, humidity 50 to 70% RH Consumables, Maintenance Unit Toner cartridges, image drum, belt unit, fuser
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 121
    Specifications „„Network Specifications Interface Protocol Pro8432WT Ethernet 10BASE-T/100BASE-TX/1000BASE-TX TCP/IPv4, TCP/IPv6, SMTP, POP3, HTTP, SNMPv1/v3, DHCP, DNS, LPR, Port9100, BOOTP, ARP, FTP, Bonjour (Rendezvous), Web Services Discovery (WSD) 5 5. Appendix - 121 -
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 122
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 123
    5. Appendix Specifications Cet équipement est conforme aux limites d'exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et d'exposition aux fréquences radioélectriques (RF) CNR-102 de l'
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 124
    Specifications „„Printer Dimensions TOP VIEW 449 mm SIDE VIEW 255 mm 5 420 mm 1107 mm 552 mm 300 mm 360 mm 400 mm 760 mm 5. Appendix - 124 -
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 125
    ....... 34, 38, 41, 42 Product Requirements........... 30 R Feed Rollers 105 Fuser Unit 103 I Image Drum 97 Install Printer Driver (OS X 38, 42 Printer Driver (Windows)..........34, 41 IP Address 34 M Rear Output Tray 55 T Toner Cartridges 93 W Windows 30 MP Tray 49 O OS X 30 Other
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 126
    :www.oki.pt E-mail : [email protected] Oki Service Serviço de apoio técnico ao Cliente Tel: 214 727 660 E-mail : [email protected] OKI Systems 66 65 00 Fax: +45 43 66 65 90 E-mail: [email protected] / [email protected] Website: www.oki.dk OKI Europe Limited, Sucursal en España Complejo Vega Norte. C/ Anabel Segura,
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 127
    5276 Fax: 1-856-222-5260 Email: [email protected] Oki Data de Mexico, S.A. de C.V. Mariano Escobedo # oki.com.au OKI Data New Zealand 8 Antares Place Rosedale, Auckland, 0632 New Zealand Tel: (64) 9 477 0500 (Customer Support: 0800 778 800) Fax: (64) 9 477 0549 http://www.oki.co.nz/ Oki Data
  • Oki PRO8432WT | Pro8432WT - User Guide - Page 128
    www.oki.com/printing/ March 2017 46603902EE Rev1
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
Pro8432WT