Oki PRO8432WT Pro8432WT - User Guide - Page 21
Turning On/Off the Power, Power Supply Conditions
View all Oki PRO8432WT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Turning On/Off the Power Power Supply Conditions The power supply must meet the following conditions: Voltage: 110 - 127 VAC (Range 99 - 140 VAC) 220 - 240 VAC (Range 198 - 264 VAC) Frequency: 50/60 Hz ± 2% Note ●● If the power supply is unstable, use a voltage regulator. ●● The maximum power consumption of this printer is 1400 W. Ensure that the power supply is sufficient to operate this printer. ●● We do not guarantee operation where an uninterruptible power system (UPS) or inverter is used. Do not use an uninterruptible power system (UPS) or inverter. There is a risk of getting WARNING an electric shock and/or causing fire. ●● Be sure to turn off the power supply switch when attaching or removing the AC cable and earth wire. ●● Be sure to connect an earth wire to the grounding terminal of exclusive use. ●● Please do not connect with the ground of a water pipe, a gas pipe, and a telephone wire, and a lightning rod by any means. ●● Make sure to connect with the ground terminal before connecting the power cord to the power supply plug. ●● Be sure to plug in and unplug the AC cable while holding on to the power supply plug. ●● Insert the AC cable plug completely into the wall socket securely. ●● Do not touch the power cord, or printer, if your hands are wet. ●● Install a power cord in the place which is not stepped on, and do not place a thing on a power cord. ●● Do not use the cord tied in a bundle. ●● Please do not use the damaged power cord. ●● Do not use multi-outlet adapters. ●● Do not connect this printer and other electric products to the same wall socket. If it connects simultaneously with an air conditioner, copier, shredder, etc. Especially, a printer may incorrect-operate by the electric noise. When you connect with the same wall socket unavoidably, please use a commercial noise filter or a commercial noise cut transformer. ●● Use the attached power cord and insert it directory with the ground terminal. Do not use the power cord for other product for the printer. ●● Do not use an extension cord. When you use it unavoidably, use the thing more than rated 15 A. ●● Use of an extended code may not operate a printer normally by AC voltage descent. ●● During printing, do not shut off a power supply or do not pull out a power supply plug. ●● When you use it neither for consecutive holidays nor a travel for a long time, pull out a power cord. ●● Do not use attached power cord to the other products. Preparing Your Printer Turning On the Power 1 1 Plug the AC cord (1) into the AC power socket of your printer. 1 2 Plug the AC cord into the electric socket. 3 Hold down the power switch (2) for about 1 second to turn on the power. 2 The Power switch LED indicator lights up when the printer turns on. The message "Ready To Print" is displayed in the operator panel once printer is ready. 1. Setup - 21 -