Olympus C765 Reference Manual - Page 128

Recording sound Sound can be added to a still picture that you have already taken. (This is known as "after-recording") You can also re-record over the sound that has already been recorded. Total recording time per picture is approximately 4 seconds. Mode dial 1 Use the arrow pad to select the still picture you want to add sound to. g"Viewing still pictures" (P.113) 2 In the top menu, select MODE MENU PLAY R. g"How to use the menus" (P.33) Arrow pad OK button 3 Press d to display START. 4 Turn the camera microphone toward the sound you want to record and press e to start recording. • The BUSY bar is displayed during recording. SEt CARD EDIt PLAY Microphone 7 StARt Playback • If the microphone is placed farther than 1 m (3.3 ft.) from the subject, sound may not be recorded properly. Note • If you re-record the sound, the original sound is erased. • You may not be able to record sound when there is insufficient card memory (the "CARD FULL" message is displayed). • Sound recording may pick up camera noises, such as button operation or shutter movement. • Once sound is added to a picture, it is not possible to erase only the sound. In this case, make a re-recording with silence. • This camera cannot play back sound. 127