Olympus C765 Reference Manual - Page 26

Startup/Shutdown screen This image is displayed on the monitor each time the camera is turned on or off. You can also use your favorite image (P.152). Power on/off Getting started 1 Startup/Shutdown screen (Factory default setting) If the card is not recognized (card check) When the power is turned on, the camera checks the card automatically. If there is no card in the camera or a card that is not supported by this camera is inserted, the following screen is displayed. Monitor indication q NO CARD CARD%SEtUP POWER%OFF SELECt FORMAt GO FORMAt CAUtION ERASING%ALL YES NO SELECt GO Corrective action There is no card in the camera or the card is not inserted properly. → Insert a card. If a card is already inserted, remove it and insert it again correctly. The card cannot record, play back or erase pictures. Format the card or replace it with a new one. → Press ac to select POWER OFF, then press e. Replace the card with a new one. → Format the card. Press ac to select I FORMAT, then press e to display the confirmation screen. Select YES and press e. Formatting starts. If the card was successfully formatted, the camera is ready to take pictures. All data stored on the card is erased when the card is formatted. Note 25