Olympus D545 D-545 Zoom Advanced Manual (English) - Page 75

Setting the date and time This function lets you set the date and time. The date and time is saved with each picture, and is used in the file name. Settings Top menu [MODE MENU] [SETUP] [X] g"How to use the menus" (P. 16) • In : Top menu [X] 1 Press ac to select one of the following date formats: [Y-M-D] (Year/Month/Day), [M-D-Y] (Month/Day/Year), [D-M-Y] (Day/ Month/Year), and press d. • Move to the year setting. • The following steps show the procedure used when the date and time settings are set to [Y-M-D]. 2 Press ac to set the year, and press d to move to the month setting. • To move back to the previous setting, press b. • The first two digits of the year are fixed. 3 Repeat this procedure until the date and time are completely set. X 2005 . 01 . 01 Y MD 00 : 00 SELECT SET GO OK X 2005 . 01 . 01 6 SELECT 00 : 00 SET GO OK • The time is displayed in the 24-hour format. Consequently, 2 p.m. is displayed as 14:00. 4 Press Z. • For a more accurate setting, press Z when the time signal hits 00 seconds. Note • The date and time settings return to the factory default settings if the camera is left without batteries for approximately 3 days. The settings will be canceled more quickly if batteries were only loaded in the camera for a short time before being removed. Before taking important pictures, check that the date and time settings are correct. • If the date and time setting is canceled, a warning is displayed on the monitor the next time the camera is turned on. g"Error codes" (P. 107) 75