Olympus E-30 E-30 Instruction Manual (English) - Page 77

Direct button w + k Super control panel i p: [w] Menu MENU [X] [w] w button F button k Setting display Viewfinder Control panel  TIPS 5 To adjust the flash using only the dials: j Assign the flash intensity control function to the main dial (or sub dial). g"DIAL Flash shooting FUNCTION" (P. 94) x Notes • This does not work during manual flash. • This does not work when the flash control mode on the electronic flash is set to MANUAL. • If flash intensity is adjusted on the electronic flash, it will be combined with the camera's flash intensity setting. • When [w+F] is set to [ON], the flash intensity value will be added to the exposure compensation value. g"w+F" (P. 101) Flash bracketing The camera shoots multiple frames, changing the amount of light emitted by the flash for each shot. The camera shoots 3 frames at a time with the following amount of light: optimum light, light adjusted in the - direction, and light adjusted in the + direction. Menu MENU [X] [FL BKT] • The compensation value will change according to the EV step. g"EV STEP" (P. 100) • In single-frame shooting, the amount of light emitted by the flash changes every time the shutter button is pressed. • In sequential shooting, hold down the shutter button until the selected number of frames are taken. • Releasing the shutter button stops flash bracketing shooting. When it stops, 0 blinks in the viewfinder and on the control panel and 0 is displayed in green on the super control panel. AE BKT FL BKT WB BKT OFF FL BKT 3F 0.3EV ISO BKT 3F 0.7EV MULTIPLE EXP3OF S1U.0REEV BACK SET 77 EN