Olympus E-30 E-30 Instruction Manual (English) - Page 80
After shooting preparations are completed, take some test shots to check the, Select a flash mode.
UPC - 050332166967
View all Olympus E-30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
4 Use the super control panel to set the flash mode and other settings for each group. Flash intensity value Group • Select the flash control mode and adjust the flash intensity individually for groups A, B, and C. For MANUAL, select the flash intensity. 2009. 03.16 TTL +1.0 M 1/8 OFF - RC LO 2 Flash control Flash mode intensity 5 Select a flash mode. Normal flash/Super FP flash • Switch between normal flash and Super FP flash. Communication light level • Set the communication light level to [HI], [MID], or [LO]. Channel • Set the communication channel to the same channel used on the flash. • Red-eye reduction flash is not possible in RC mode. 6 Press the # button to raise the built-in flash. 7 After shooting preparations are completed, take some test shots to check the flash operation and images. 5 8 Begin shooting while checking the charging completed indications of the camera and flash. x Notes Flash shooting • Although there is no limit to the number of wireless flashes you can use, it is recommended that each group have no more than three flashes to prevent flash malfunction due to mutual interference. • In RC mode, the built-in flash is used to control the wireless flash. The built-in flash cannot be used for flash shooting in this mode. • For 2nd curtain synchronization, set the shutter speed and anti-shock settings to within 4 seconds. Wireless flash shooting may not operate properly when using a slower shutter speed or anti-shock setting. 80 EN