Olympus E-300 EVOLT E-300 Basic Manual (English) - Page 26

Shooting

Page 26 highlights

Shooting 1 Place the AF frame on the subject while viewing through the viewfinder. AF frame Viewfinder Shutter button Card access lamp 2 En Adjust the focus. Press the shutter button gently (halfway). ● The focus is locked. The AF confirmation mark and the AF focusing frame light up in the viewfinder. ● The shutter speed and aperture value that have been set automatically by the camera are displayed. ● The control panel screen is not displayed when the shutter button is pressed. Halfway down AF confirmation mark 3 Release the shutter. Press the shutter button all the way (fully). ● When a picture is taken, a shutter sound is output. ● The card access lamp blinks and the camera starts recording the picture. ● After 1 minute without any operation being performed, the monitor turns off and the camera stops operating. To wake up the camera, simply press any button, e.g. the shutter button. After about 1 hour without being used, the camera will turn off automatically. Turn on the camera again. All the way down P -.- - - ESP -.- AUTO ISO FP WB FOCUS S-AF AF ILLUMINATOR DRIVE HQ 3264 2448 .- AUTO AUTO sRGB Memory gauge 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

26
En
1
Place the AF frame on the subject
while viewing through the viewfinder.
2
Adjust the focus.
Press the shutter button gently (halfway).
The focus is locked. The AF confirmation
mark and the AF focusing frame light up in
the viewfinder.
The shutter speed and aperture value that
have been set automatically by the camera
are displayed.
The control panel screen is not displayed
when the shutter button is pressed.
3
Release the shutter.
Press the shutter button all the way (fully).
When a picture is taken, a shutter sound is
output.
The card access lamp blinks and the camera
starts recording the picture.
After 1 minute without any operation being
performed, the monitor turns off and the
camera stops operating. To wake up the
camera, simply press any button, e.g. the
shutter button. After about 1 hour without
being used, the camera will turn off
automatically. Turn on the camera again.
Shooting
Shutter button
AF confirmation mark
Viewfinder
AF frame
Halfway down
All the way down
Card access
lamp
.
.
.
ESP
P
AUTO
FP
FOCUS
AUTO
AUTO
ISO
DRIVE
S-AF
AF ILLUMINATOR
HQ
2448
3264
WB
s
RGB
Memory gauge