Olympus E520 E-520 Instruction Manual (English) - Page 125
Program line diagram (P mode), Exposure warning display, Information - zoom lens
UPC - 050332163997
View all Olympus E520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Program line diagram (P mode) In the P mode, the camera is programmed such that the aperture value and shutter speed are automatically selected according to the subject's brightness as shown below. The program line diagram varies with the type of lens mounted. When using the 14 - 42 mm f3.5 - 5.6 zoom lens (focal length: 14 mm, ISO100) Program shift Exposure warning display If the optimum exposure cannot be obtained when pressing the shutter button halfway, the display will blink in the viewfinder and on the super control panel. Shooting mode Warning display example (blinking) Status The subject is too dark. Action • Increase the ISO sensitivity. • Use the flash. P The subject is too bright. • Decrease the ISO sensitivity. • Use a commercially available ND filter (for adjusting the amount of light). The subject is underexposed. • Decrease the aperture value. • Increase the ISO sensitivity. Information A The subject is overexposed. • Increase the aperture value. • Decrease the ISO sensitivity or use a commercially available ND filter (for adjusting the amount of light). 13 125 EN