Olympus E520 E-520 Instruction Manual (English) - Page 77
button to raise the built-in flash., Select a flash mode.
UPC - 050332163997
View all Olympus E520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
3 Set RC mode on the camera to [ON]. • MENU[X][#RC MODE][ON] • The super control panel switches to RC mode. • You can press the INFO button to switch the super control panel display. 4 Use the super control panel to set the flash mode and other settings for each group. Flash intensity value Group • Select the flash control mode and adjust the flash intensity individually for groups A, B, and C. For MANUAL, select the flash intensity. 2008. 08.16 TTL +1.0 M 1/8 OFF - RC LO 2 Normal flash/Super FP flash • Switch between normal flash and Super FP flash. Communication light level • Set the communication light level to [HI], [MID], or [LO]. Flash control Flash mode intensity 5 Select a flash mode. Channel • Set the communication channel to the same channel used on the flash. • Red-eye reduction flash is not possible in RC mode. 6 Press the # button to raise the built-in flash. 7 After shooting preparations are completed, take some test shots to check the flash operation and images. 8 Begin shooting while checking the charging completed indications of the camera and flash. x Notes • Although there is no limit to the number of wireless flashes you can use, it is recommended 7 that each group have no more than three flashes to prevent flash malfunction due to mutual interference. • In RC mode, the built-in flash is used to control the wireless flash. The built-in flash cannot be used for flash shooting in this mode. • For 2nd curtain synchronization, set the shutter speed and anti-shock settings to within 4 seconds. Wireless flash shooting may not operate properly when using a slower shutter speed or anti-shock setting. Flash shooting 77 EN