Olympus E520 E-520 Instruction Manual (English) - Page 46
Bulb shooting, To fix the focus during manual focus shooting
UPC - 050332163997
View all Olympus E520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Underexposure Overexposure Exposure level indicator 250 M 2008. 08.16 F5.6 -0.3 Optimum exposure OFF arge Normal Noise in images During shooting at slow shutter speeds, noise may appear on-screen. These phenomena are caused when current is generated in those sections of the image pickup device that are not normally exposed to light, resulting in a rise in temperature in the image pickup device or image pickup device drive circuit. This can also occur when shooting with a high ISO setting in a high-temperature environment. To reduce this noise, the camera activates the noise reduction function. 4 g"Noise reduction" (P. 69) TIPS The picture looks blurred: j The use of a monopod or tripod is recommended when taking a picture at slow shutter speed. j When the shutter speed is slow, camera shake is more likely to occur. You can reduce camera shake by using the image stabilizer. g"Image stabilizer" (P. 60) To change the exposure adjustment interval: j This can be set in 1/3 EV, 1/2 EV or 1 EV increments. g"EV STEP" (P. 94) To switch the operation between setting the shutter speed and aperture value: j You can set the aperture value using only the control dial. g"DIAL FUNCTION" (P. 89) x Notes • Exposure compensation is not available in M mode. Exposure Bulb shooting You can take a picture with a bulb exposure time in which the shutter stays open as long as you hold down the shutter button. Bulb shooting can also be done using an optional remote control (RM-1). g"Bulb shooting with the remote control" (P. 60) In M mode, set the shutter speed to [BULB]. • [buLb] is displayed in the viewfinder and [BULB] on the super control panel. TIPS To automatically end bulb shooting after a specified period of time: j You can set the maximum time for bulb shooting. g"BULB TIMER" (P. 95) To fix the focus during manual focus shooting: j You can fix the focus so the focus does not change even if the focus ring is turned during exposure. g"BULB FOCUSING" (P. 89) x Notes • The following functions are not available during bulb shooting. Sequential shooing/self-timer shooting/AE bracket shooting/image stabilizer/flash bracketing 46 EN