Olympus WS-710M WS-710M Instructions (English) - Page 64
Press the, button.
UPC - 050332175747
View all Olympus WS-710M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Menu setting method Menu setting method 7 Press the OK `/MENU button. • Formatting begins and [Format !] flashes on the display. 5 • [Format Done] appears when formatting ends. Notes • Never format the recorder from a PC. • Once the recorder is formatted, the music files with DRM may not be transferred to the recorder again. • When the recorder is formatted, all the saved data, including locked files and read-only files, are erased. • After formatting, recorded voice file names may start from [0001]. EN • When returning the settings for the functions to their initial settings, use 64 [Reset Settings] (☞ P.47, P.57). For WS-710M, WS-700M only: • When an microSD card is inserted in the recorder, be sure to confirm the recording media as either [Built-in Memory] or [microSD Card] so that there is no mistake (☞ P.47, P.57). • It may take over 10 seconds to complete processing. Never perform operations such as the following while processing, as they may damage the data. In addition, replace the battery with a new one in order to ensure that the battery will not run out while processing. 1 Disconnecting the AC Adapter while processing. 2 Removing the battery while processing. 3 Remove the microSD card during processing when [microSD Card] is being used as the recording media. • Formatting on the recorder will be Quick Format. If you format the microSD card, information of file management is refreshed and the data inside the microSD card is not deleted completely. When handing over and disposing the microSD card, be careful about the data leakage from the microSD card. We recommend the microSD card to be destroyed when you dispose the microSD card (☞ P.19). For WS-600S only: • It may take over 10 seconds to complete processing. Never perform operations such as the following while processing, as they may damage the data. In addition, replace the battery with a new one in order to ensure that the battery will not run out while processing. 1 Disconnecting the AC Adapter while processing. 2 Removing the battery while processing.