Onkyo 8222 Owner Manual - Page 13

Connecting Your Speakers-Continued Configuring the Speaker Impedance (TX-8522 North American model only) In this model, the factory default for speaker impedance is "8 ohms." When you change the speaker impedance setting, read "Speaker Connection Precautions" on page 12 carefully before performing the procedures below. Note: Be sure to minimize the volume level on the receiver 4 before configuring the speaker impedance. 1 Press the SETUP button on the remote controller to complete the setting. When you restore the impedance setting to 8 ohms, use the same procedures above. 2, 4 SETUP 3 1 Turn on the power. 2 Press the SETUP button on the remote controller. The "Impedance: 8 ohms" indication appears in the display. 3 Change the impedance value to "6 ohms" using the [ ]/[ ] buttons. 13