Onkyo 8222 Owner Manual - Page 35

Speci, cations TX-8222

Page 35 highlights

Specifications (TX-8222) Amplifier Section Rated Output Power (FTC) (North American) All channels: 50 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.08 % Rated Output Power (IEC) (European and Australian) 2 ch × 70 W at 4 ohms, 1 kHz, 2 ch driven Maximum Output Power (JEITA) (Asian) 90 W at 4 ohms, 1 kHz, 2 ch driven Dynamic Power North American: 135 W + 135 W (2 Ω) 105 W + 105 W (4 Ω) 70 W + 70 W (8 Ω) European and Australian: 110 W + 110 W (2 Ω) 90 W + 90 W (4 Ω) 55 W + 55 W (8 Ω) THD (Total Harmonic Distortion) 0.08 % (Power Rated)/ 0.08 % (1 kHz, 1 W) Damping Factor 60 (Front, 1 kHz, 8 Ω) Input Sensitivity and Impedance 150 mV/ 50 kΩ (LINE) 2.5 mV/ 50 kΩ (PHONO MM) Output Level and Impedance 150 mV/ 2.2 kΩ (REC OUT) Frequency Response 10 Hz-100 kHz/ +1 dB-3 dB (CD) Tone Control ±10 dB, 100 Hz (BASS) ±10 dB, 10 kHz (TREBLE) Signal to Noise Ratio 100 dB (LINE, IHF-A) 80 dB (PHONO, IHF-A) Speaker Impedance 4 Ω-16 Ω Tuner Section I FM Tuning Frequency Range Usable Sensitivity Signal to Noise Ratio THD Frequency Response Stereo Separation North American: 87.5 MHz- 107.9 MHz Others: 87.5 MHz- 108.0 MHz Stereo: 22.2 dBf (75 Ω IHF) Mono: 15.2 dBf (75 Ω IHF) Stereo: 67 dB (IHF-A) Mono: 73 dB (IHF-A) Stereo: 0.5 % (1 kHz) Mono: 0.3 % (1 kHz) 30 Hz-15 kHz / ±1 dB 40 dB (1 kHz) I AM Tuning Frequency Range Usable Sensitivity Signal to Noise Ratio THD North American: 530 kHz-1710 kHz Others: 522 kHz-1611 kHz 300 µV 40 dB 0.7 % General Power Supply Power Consumption Standby Power Consumption Dimensions (W × H × D) Weight North American: AC 120 V, 60 Hz European: AC 230-240 V, 50 Hz Others: AC 230-240 V, 50Hz North American: 2.1 A European: 180 W Others: 180 W North American: 0.2 W Others: 0.3 W 435 × 150 × 332 mm 17-1/8" × 5-7/8" × 13-11/16" 7.5 kg 16.5 lbs. I Audio Inputs Analog Inputs PHONO, CD, TAPE 1, TAPE 2, LINE 1, LINE 2 I Audio Outputs Analog Outputs TAPE 1, TAPE 2 Speaker Outputs SPEAKERS A SPEAKERS B Phones 1 IR Input/Output 1/1 Specifications and features are subject to change without notice. 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

35
Speci
cations (TX-8222)
Amplifier Section
Tuner Section
FM
AM
General
Audio Inputs
Audio Outputs
Speci
cations and features are subject to change without
notice.
Rated Output Power (FTC) (North American)
All channels:
50 watts minimum continuous power
per channel, 8 ohm loads, 2 channels
driven from 20 Hz to 20 kHz, with a
maximum total harmonic distortion of
0.08 %
Rated Output Power (IEC) (European and Australian)
2 ch
×
70 W at 4 ohms, 1 kHz, 2 ch driven
Maximum Output Power (JEITA) (Asian)
90 W at 4 ohms, 1 kHz, 2 ch driven
Dynamic Power
North American:
135 W + 135 W (2
)
105 W + 105 W (4
)
70 W + 70 W (8
)
European and Australian:
110 W + 110 W (2
)
90 W + 90 W (4
)
55 W + 55 W (8
)
THD (Total Harmonic
Distortion)
0.08 % (Power Rated)/ 0.08 % (1 kHz,
1 W)
Damping Factor
60 (Front, 1 kHz, 8
)
Input Sensitivity and
Impedance
150 mV/ 50 k
(LINE)
2.5 mV/ 50 k
(PHONO MM)
Output Level and
Impedance
150 mV/ 2.2 k
(REC OUT)
Frequency Response
10 Hz
100 kHz/ +1 dB
3 dB (CD)
Tone Control
±10 dB, 100 Hz (BASS)
±10 dB, 10 kHz (TREBLE)
Signal to Noise Ratio
100 dB (LINE, IHF-A)
80 dB (PHONO, IHF-A)
Speaker Impedance
4
16
Tuning Frequency
Range
North American: 87.5 MHz
107.9 MHz
Others: 87.5 MHz
108.0 MHz
Usable Sensitivity
Stereo: 22.2 dBf (75
IHF)
Mono: 15.2 dBf (75
IHF)
Signal to Noise Ratio
Stereo: 67 dB (IHF-A)
Mono: 73 dB (IHF-A)
THD
Stereo: 0.5 % (1 kHz)
Mono: 0.3 % (1 kHz)
Frequency Response
30 Hz
15 kHz / ±1 dB
Stereo Separation
40 dB (1 kHz)
Tuning Frequency
Range
North American: 530 kHz
1710 kHz
Others: 522 kHz
1611 kHz
Usable Sensitivity
300 μV
Signal to Noise Ratio
40 dB
THD
0.7 %
Power Supply
North American: AC 120 V, 60 Hz
European: AC 230-240 V, 50 Hz
Others:
AC 230-240 V, 50Hz
Power Consumption
North American: 2.1 A
European: 180 W
Others: 180 W
Standby Power
Consumption
North American: 0.2 W
Others: 0.3 W
Dimensions
(W
×
H
×
D)
435
×
150
×
332 mm
17-1/8"
×
5-7/8"
×
13-11/16"
Weight
7.5 kg
16.5 lbs.
Analog Inputs
PHONO, CD, TAPE 1, TAPE 2, LINE 1,
LINE 2
Analog Outputs
TAPE 1, TAPE 2
Speaker Outputs
SPEAKERS A
SPEAKERS B
Phones
1
IR Input/Output
1/1
TX-85228222_En.book 35 ページ 2006年5月4日
木曜日
午前11時51分