Onkyo A-9010 Instruction Manual - Page 6
Connections
View all Onkyo A-9010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Connections GND terminal: Connects the turntable's ground wire. RI MODE switch (North American and Continental European models): Used to set the link function with the Onkyo equipment with RI terminal. DIGITAL IN COAXIAL (D1)/OPTICAL (D2) jacks (North American and Continental European models): Connects to a reproduction equipment with digital audio output terminal such as CD player, TV, etc. Connect with an optical digital cable (OPTICAL) or an coaxial digital cable (COAXIAL). 0 As the OPTICAL (D2) jack of the unit has a cover, push in the cable against the cover as it is turned inside. 0 To prevent cover damage, hold the optical plug straight when inserting and removing. PHONO (MM) jacks: Connects to a turntable with an audio pin cable. LINE IN 1/2/3/4 jacks: Connects to a reproduction equipment such as CD player, etc., with an audio pin cable. LINE OUT jacks: Connects to a recording equipment such as cassette tape deck, etc., with an audio pin cable. This is used to record an audio from the reproduction equipment connected to this unit. SPEAKERS terminals: Connect speakers. Cables used to connect (sold separately) Audio pin cable (North American and Continental European models) Coaxial digital cable (North American and Continental European models) Optical digital cable Speaker cable RI cable Push plugs in all the way to make good connections. Loose connections can cause noise or malfunctions. Right! Wrong! En-6