Onkyo HT-R520 Owner Manual - Page 59
Specifications - reset factory defaults
View all Onkyo HT-R520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
)53@&OCPPL 1BHF .POEBZ .BSDI 1. Specifications Amplifier Section Power output: All channels: 130 W (8 Ω, 20 Hz-20 kHz, FTC) Dynamic power: 2 x 260 W (3 Ω, front) 2 x 200 W (4 Ω, front) 2 x 95 W (8 Ω, front) THD (total harmonic distortion): 0.08% (rated power) Damping factor: 60 (front, 1 kHz, 8Ω) Input sensitivity and impedance: 200 mV/47 k Ω (LINE) Output level and impedance: 200 mV/470 Ω (REC OUT) Frequency response: 10 Hz-100 kHz/+1 dB, -3 dB (Direct mode) Tone control: ±12 dB, 50 Hz (BASS) ±12 dB, 20,000 Hz (TREBLE) S/N ratio (Direct mode): 100 dB (CD, IHF-A) Speaker impedance: 6 Ω~ Video Section Input sensitivity, output level and impedance: 1.0 Vp-p/75 Ω (component and S-Video Y) 0.7 Vp-p/75 Ω (component PB/CB, PR/CR) 0.28 Vp-p/75 Ω (S-Video C) 1.0 Vp-p/75 Ω (composite) Component video frequency response: 5 Hz-50 MHz Tuner Section ■ FM Tuning frequency range: 87.5-108.0 MHz Usable sensitivity: FM STEREO 17.2 dBf, 2.0 µV (75 Ω IHF) FM MONO 11.2 dBf, 1.0 µV (75 Ω IHF) S/N ratio: FM STEREO 70 dB (IHF-A) FM MONO 76 dB (IHF-A) THD: FM STEREO 0.3% (1 kHz) FM MONO 0.2% (1 kHz) FM stereo separation: 45 dB at 1 kHz ■ AM Tuning frequency range: 530-1700 kHz Usable sensitivity: 30 µV S/N ratio: 40 dB THD: 0.7% General Power supply: Power consumption: Standby power consumption: Dimensions (W x H x D): Weight: AC 120 V, 60 Hz 4.6 A 2.5 W 17-1/8" x 5-7/8" x 14-13/16" (435 x 150 x 376 mm) 22.5 lbs. (10.2 kg) ■ Video Inputs Component video inputs:2 (DVD, Video 1/2/3) S-Video inputs: 4 (DVD, Video 1-3) Video inputs: 4 (DVD, Video 1-3) ■ Video Outputs Component video outputs: 1 (Component Video Out) S-Video outputs: 2 (Video 1 Out, Monitor Out) Video outputs: 2 (Video 1 Out, Monitor Out) ■ Audio Inputs Digital inputs: Analog inputs: Multichannel analog inputs: 4 (Optical 1-3, Coaxial) 6 (CD, Tape, DVD, Video 1-3) 5.1 ch (Front L/R, Center, Surround L/R, Subwoofer) ■ Audio Outputs Analog outputs: 2 (Tape Out, Video 1 Out) Subwoofer pre out: 1 Speaker outputs: 6+2 Phones: 1 Specifications and features are subject to change without notice. • The HT-R520 contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely even that this should happen, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again. That should fix it. • To reset the HT-R520 to its factory defaults, turn it on and, while holding down the [VIDEO 1] button, press the [STANDBY/ON] button. "Clear" will appear on the display and the HT-R520 will enter Standby mode. 59