Onkyo TX-NR509 Owner Manual - Page 11
Connections, Connecting the AV Receiver, Connecting Your Speakers - model
View all Onkyo TX-NR509 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Connections Connecting the AV Receiver Connecting Your Speakers Connecting the Speaker Cables The following illustration shows which speaker should be connected to each pair of terminals. If you're using only one surround back speaker, connect it to the SURROUND BACK L PRE OUT jack. Surround right Surround left L R AUDIO INPUT Surround back right Power amplifier Surround back left Front right Front left Center Connect your Power amplifier's analog audio input jacks to the AV receiver's SURROUND BACK L/R PRE OUT jacks with audio cables. ■ Screw-type speaker terminals Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown. 1/2" to 5/8" (12 to 15 mm) ■ Banana Plugs (North American models) • If you are using banana plugs, tighten the speaker terminal before inserting the banana plug. • Do not insert the speaker code directly into the center hole of the speaker terminal. En 11