Onkyo TX-NR509 Owner Manual - Page 62
Recording, Zone 2, Music Server and Internet Radio, USB Device Playback, Others - network setup
View all Onkyo TX-NR509 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
When connecting UP-A1 Dock to the radio tuner - UP-HT1 (North American models)/UP-DT1 (European, Australian and Asian models) with AUTO selected by the tuner's Mode Selector switch, you can switch the input source between UP-A1 Dock and the tuner, by pressing PORT repeatedly on the front panel. If you still can't control your iPod/iPhone, start - playback by pressing your iPod/iPhone model's Play button. Remote operation should then be possible. Try resetting your iPod/iPhone. - Depending on your iPod/iPhone, some buttons may - not work as expected. ■ The AV receiver unexpectedly selects your iPod/iPhone as the input source Always pause iPod/iPhone playback before selecting - a different input source. If playback is not paused, the Direct Change function may select your iPod/iPhone as the input source by mistake during the transition between tracks. ■ Can't connect to the AV receiver from a Web browser If you're using DHCP, your router may not always 49 allocate the same IP address to the AV receiver, so if you find that you can't connect to a server or Internet radio station, recheck the AV receiver's IP address on "Network" screen. Check the "Network Setup". 49 USB Device Playback ■ Can't access the music files on a USB device Make sure the USB device is plugged in properly. - The AV receiver supports USB devices that support - the USB mass storage device class. However, playback may not be possible with some USB devices even if they conform to the USB mass storage device class. USB memory devices with security functions cannot - be played. Recording ■ Can't record On your recorder, make sure the correct input is - selected. (European, Australian and Asian models) When - the Pure Audio listening mode is selected, recording is not possible because no video signals are output. Select another listening mode. Zone 2 ■ There's no sound Only components connected to analog inputs can be - played in Zone 2. Music Server and Internet Radio ■ Can't access the server or Internet radio Check the network connection between the AV - receiver and your router or switch. Make sure that your modem and router are properly - connected, and make sure they are both turned on. Make sure the server is up and running and 64 compatible with the AV receiver. Check the "Network Setup". 49 ■ Playback stops while listening to music files on the server Make sure your server is compatible with the AV 64 receiver. If you download or copy large files on your - computer, playback may be interrupted. Try closing any unused programs, use a more powerful computer, or use a dedicated server. If the server is serving large music files to several - networked devices simultaneously, the network may become overloaded and playback may be interrupted. Reduce the number of playback devices on the network, upgrade your network, or use a En switch instead of a hub. 62 Others ■ Standby power consumption In the following cases, the power consumption may reach up to a maximum of 37 W: 1. You are using the Universal Port jack. 2. "Network Control" is set to "Enable" in the "Network Setup" setting. 3. "HDMI Ctrl (RIHD)" setting is set to "On". (Depending on the TV status, the AV receiver will enter Standby mode as usual.) 48, 49, 53 ■ The sound changes when I connect my headphones When a pair of headphones is connected, the - listening mode is set to Stereo, unless it's already set to Stereo, Mono, Direct, or Pure Audio (European, Australian and Asian models). ■ The display doesn't work The display is turned off when the Pure Audio - listening mode is selected. ■ How do I change the language of a multiplex source Use the "Input Ch (Mux)" setting in the "Audio 43 Adjust" menu to select "Main" or "Sub". ■ The V functions don't work To use V, you must make an V connection and 17 an analog audio connection (RCA) between the component and AV receiver, even if they are connected digitally. ■ The functions and Direct Change don't work for components connected via V These functions don't work when Zone 2 is turned 17 on.