Onkyo TX-SR876 Owner Manual - Page 129
Mac Address, Control, Subnet Mask, Gateway, DNS Server, Proxy URL, Enable, Disable, Class
UPC - 751398008337
View all Onkyo TX-SR876 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
NET/USB (TX-NR906 only)-Continued 3 Use the Up and Down [R]/[X] but- tons to select "6. Network", and then press [ENTER]. The "Network" screen appears. 7-6. Network MAC Address Control Port xx : xx : xx : xx : xx : xx Enable xxxxx MOVE VALUE ENTER INPUT RETURN RETURN SETUP EXIT 4 Use the Up and Down [R]/[X] but- tons to select the settings, and use the Left and Right [F]/[S] buttons to set them. To enter an IP address, select the set- ting, and then press [ENTER]. The arrow [R]/[X]/[F]/[S] buttons can then be used to enter numbers. Press [ENTER] again to set the number. The settings are explained on the next page. 5 When you've finished, press the Up and Down [R]/[X] buttons to select " Save Settings", and then press [ENTER]. Setup closes. 7-6. Network Proxy Proxy URL Proxy Port Save Settings Disable 8080 MOVE VALUE ENTER ENTER RETURN RETURN SETUP EXIT When modifying network settings, after modifying it is necessary to execute " Save Settings". 6 When you've finished, press the [SETUP] button. Setup closes. Note: This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. Mac Address This is the AV receiver's MAC (Media Access Control) address. This address cannot be changed. Control This setting enables or disables control over the network. Enable: Control over the network enabled. Disable: Control over the network disabled. ■ Port This is the network port used for control over the network. DHCP This setting determines whether or not the AV receiver uses DHCP to automatically configure its IP Address, Subnet Mask, Gateway, and DNS Server settings. Enable: DHCP enabled. Disable: DHCP disabled. If you select "Disable", you must configure the "IP Address", "Subnet Mask", "Gateway", and "DNS Server" settings yourself. IP Address If you set the "DHCP" setting to "Disable", you must specify an IP address. Enter a static IP address provided by your ISP. The IP address must be within the following ranges. Class A: 10.0.0.0 to 10.255.255.255 Class B: 172.16.0.0 to 172.31.255.255 Class C: 192.168.0.0 to 192.168.255.255 Most routers use Class C IP addresses. Subnet Mask If you set the "DHCP" setting to "Disable", you must specify a subnet mask address. Enter the subnet mask address provided by your ISP (typically: 255.255.255.0). Gateway If you set the "DHCP" setting to "Disable", you must specify a gateway address. Enter the gateway address provided by your ISP. DNS Server If you set the "DHCP" setting to "Disable", you must specify a DNS server. Enter the DNS server addresses provided by your ISP. Proxy URL To use a Web proxy, enter its URL here. Proxy Port If you're using a Web proxy, enter a proxy port number here. 129