Onkyo TX-SV525 Owner Manual - Page 12

Making antenna connections The antenna adaptor is only included with worldwide models. FM/TV Outdoor Antenna Indoor T-shaped Antenna J 300 ohm ribbon wire Connecting the T-shaped animals 300 ribbon wire to the 75/340 ohm for (Woll'tdwfde ogle) Loosen the screws and wrap the wire around these screws. Then tighten the screws with a screwdriver 1 2 3 Connecting the coaxial cable to the 75/300 ohm adaptor (WorldWide models) -Slit B Slit C Wire A 6 l3l 6 mm rmr, mm 15mm I. With your fingernail or a small screwdriver, press the stoppers outwards and remove the cover. Remove the transformer wire A from slit 1:1 and insert it into slit C. 3. Prepare the coaxial cable as shown in the diagram. Connect the 75/300 ohm antenna adaptor to the coaxial cable Insert the end of the cable. (k) Clamp it in place with pliers. Directional linkage lj type splitter To receiver To TV (or VCR) E> O Insert into the hole. - MOINNEMEM , 2 3 0 Directional linkage Do not use the same antenna for both FM and TV (or VCR) reception since the FM and TV (or VCR) signals can interfere with each other. If you must use a common FM/TV (or VCR) antenna. use a directional linkage type splitter. Assembling the AM loop antenna Assemble the loop antenna as shown in the illustration. Connecting the antenna cable 1. Press down the lever. 2. Insert wire. 3. Return the lever. 12