Optoma W307UST User's Manual
Optoma W307UST Manual
 |
View all Optoma W307UST manuals
Add to My Manuals
Save this manual to your list of manuals |
Optoma W307UST manual content summary:
- Optoma W307UST | User's Manual - Page 1
34 3D 35 Interactive 36 LAN 37 Web Management 38 Appendices 44 Troubleshooting 44 Projector Problems 47 Remote Control Problems 47 Sound Problems 47 3D Problems 47 On Screen Messages 48 Replacing the lamp 49 Replacing and cleaning the optional dust filter 50 Compatibility Modes 51 - Optoma W307UST | User's Manual - Page 2
of important operating and maintenance (servicing) instructions in the literature accompanying the appliance projector or something is loose inside. Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma - Optoma W307UST | User's Manual - Page 3
in this user's guide. ▀■ Warning- Do not look into the projector's lens when the lamp is on. The bright lamp, please allow the unit to cool down. Follow instructions as described on pages 49. ▀■ Warning- This projector will detect the life of the lamp itself. Please be sure to change the lamp - Optoma W307UST | User's Manual - Page 4
Do: Turn off and unplug the power plug from the AC outlet before cleaning the product. ™™When the PJ-lens is dirty, please contact the service center. Do not own wipe to avoid scratching the lens. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power - Optoma W307UST | User's Manual - Page 5
projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀■ In order to minimize the lamp power, use room blinds to reduce ambient light levels. Product Features Projection system DLP® Resolution WXGA ( - Optoma W307UST | User's Manual - Page 6
Usage Notice Vertical refresh scan rate Keystone correction 50 - 120 Hz ±15 degrees Weight 8 Kg (17.64 lbs) Dimensions (W x D x H) Power supply 357 (W) x 367 (D) x 135(H) mm (excluding foot) 357 (W) x 367 (D) x 231(H) mm (including reflection mirror) AC 100 - 240 V, 50 - 60 Hz Power - Optoma W307UST | User's Manual - Page 7
and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact our customer service. Projector Remote Control CR2025 3V Battery ™™Due to different applications in each Country, some regions may have different accessories. AC Power Cord VGA - Optoma W307UST | User's Manual - Page 8
Introduction Product Overview Main Unit 3 1 4 5 3 (Front View) 2 6 7 (Rear View) 8 9 10 (Bottom View) 1. Focus Ring 2. Lens 3. IR Receiver 4. Control Panel 5. Lamp Cover English 8 6. Input / Output Connection Ports 7. Power Socket 8. Elevator Feet 9. Elevator Feet 10. Elevator Feet Spacer - Optoma W307UST | User's Manual - Page 9
Introduction Control Panel POWER TEMP LAMP 1 4 5 2 RESYNC SOURCE 6 7 3 MENU 8 9 1. Power LED 2. Power 3. Menu / Exit 4. Lamp LED 5. Temp (Temperature) LED 6. Source 7. Resync 8. Four Directional Select Keys 9. IR Receiver 9 English - Optoma W307UST | User's Manual - Page 10
Introduction 1 2 Input/Output Connections 3 4 5 6 78 LAN 9 10 11 12 13 14 15 16 17 English 10 1. Mini USB Connector 2. HDMI Connector 3. VGA Output Connector 4. LAN Connector 5. Audio In 1 Connector (For VGA In 1 Connector) 6. S-Video Connector 7. Left/Right RCA Audio Input - Optoma W307UST | User's Manual - Page 11
Introduction Remote Control 1 2 11 3 ™™Before using the 4 12 remote control for the first time, 13 remove the trans- 5 14 parent insulation tape. See page 6 20 for battery installation. 7 13 TS 8 CR2302V5OL 15 9 10 1. Source 2. ReSync 3. HDMI 4. Video 5. 3D 6. Menu 7. Four - Optoma W307UST | User's Manual - Page 12
Installation Connecting the Projector Connect to Computer/Notebook Notebook Monitor 4 9 2 4 LAN 1 2 2 3 4 5 67 8 ™™Due to the difference in applications for each country, some regions may have different accessories. ™™(*) Optional accessory - Optoma W307UST | User's Manual - Page 13
Installation Connect to Video Sources DVD player, Set-top box, HDTV receiver Video output 3 95 6 1 25 LAN 34 5 6 7 8 ™™Due to the difference in applications for each country, some regions may have different accessories. ™™(*) Optional accessory Audio Output Power socket S-Video output - Optoma W307UST | User's Manual - Page 14
Installation Powering On/Off the Projector Powering On the Projector 1. Securely connect the power cord and signal cable. When connected, the Power LED will turn red. 2. Turn on the lamp by pressing " " button on the control panel or on the remote control. The Power LED will turn blue. 3. Turn on - Optoma W307UST | User's Manual - Page 15
Make sure the environment temperature is under 40 degree C. Fan lock error, OSD showing as below: The projector will switch off automatically. 0.5 second H(On), - 0.5 second L(Off) - flashing Lamp error (Lamp, Lamp driver, Color wheel) ON - - Power LED (Blue) ON - ON ON ON 15 English - Optoma W307UST | User's Manual - Page 16
Installation Adjusting the Projected Image Adjusting the Projector's Height The projector is equipped with elevator feet for adjusting the image height. 1. To raise the image: Use screw in feet to raise the image to the desired - Optoma W307UST | User's Manual - Page 17
Installation Adjusting the Projector's Zoom / Focus To focus the image, rotate the focus ring until the image is clear. Focus Ring Adjusting Projection Image Size Refer to the graphics - Optoma W307UST | User's Manual - Page 18
User Controls Using the Control Panel POWER TEMP LAMP RESYNC SOURCE MENU Using the Control Panel POWER Turn the projector on/off. Power LED Indicate the projector's status. Menu / Exit ReSync Source Launch the on-screen display (OSD) / Exit a menu. Automatically synchronize the PC analog - Optoma W307UST | User's Manual - Page 19
again to display screen picture. Mute the volume of speakers and audio out. Press again and switch to normal volume. Power on/off the projector. PC Switch to VGA 1/VGA2 source. Keystone / Aspect Volume +/- Adjust image until the sides are vertical. Use this function to choose your desired aspect - Optoma W307UST | User's Manual - Page 20
case clean and install new battery. Risk of an explosion if battery is replaced by an incorrect type. Dispose of used battery according to the instructions. English 20 - Optoma W307UST | User's Manual - Page 21
" button to go back to the main menu. 5. To exit, press the "Menu" button again. The OSD menu will be closed and the projector will automatically save the new settings. Picture Color Mode Wall Color Brightness Contrast Sharpness Saturation Hue Gamma BrilliantColorTM Color Temp Color Space Bright - Optoma W307UST | User's Manual - Page 22
Português / Polski Svenska Closed Caption VGA Out (Standby) Auto Screen(12V Out) Test Pattern Security Reset Mute Volume Microphone Volume Logo Logo Capture Auto Source Input Auto Power Off (Min) Lamp Settings Dynamic Black High Altitude Dust Filter Reminder Information Security Change Password - Optoma W307UST | User's Manual - Page 23
User Controls Main Menu 3D Interactive LAN Sub Menu 3D 3D Invert 3D Format 1080p @ 24 Interactive Settings LAN Settings 96Hz / 144Hz DHCP IP Address Subnet Mask Gateway DNS Store Reset Settings Auto / Off / On Off / On Frame Packing / Side-by-Side(Half) / Top and Bottom / Frame Sequential / - Optoma W307UST | User's Manual - Page 24
User Controls Picture Picture Color Mode Wall Color Brightness Contrast Sharpness Saturation Hue Gamma BrilliantColorTM Color Temp Color Space Bright White Low Auto Select Enter Exit Color Mode There are many factory presets optimized for various types of images. Use the ◄ or ► button to - Optoma W307UST | User's Manual - Page 25
User Controls ™™"Sharpness", "Saturation" and "Hue" functions are only supported under video mode. Sharpness Adjust the sharpness of the image. `` Press the ◄ button to decrease the sharpness. `` Press the ► button to increase the sharpness. Saturation - Optoma W307UST | User's Manual - Page 26
User Controls Screen Screen Aspect Ratio Phase Frequency H. Position V. Position Digital Zoom V. Keystone Ceiling Mount Auto Front ™™"H. Position" and "V. Position" ranges will depend on input source. Select Enter Exit Aspect Ratio `` Auto: Keep the image with original width-height ratio and - Optoma W307UST | User's Manual - Page 27
User Controls Digital Zoom Press the ◄ button to reduce the size of an image. Press the ► button to magnify an image on the projection screen. V Keystone Press the ◄ or ► button to adjust image distortion vertically. If the image looks trapezoidal, this option can help make the image rectangular. - Optoma W307UST | User's Manual - Page 28
User Controls Setting Setting Language Menu Location Closed Caption VGA OUT (Standby) LAN (Standby) Auto Screen(12V Out) Test Pattern Security Reset English CC1 Off Off Off Off Select Enter Exit Language Choose the multilingual OSD menu. Press the ◄ or ► button into the sub - Optoma W307UST | User's Manual - Page 29
OUT connection. Auto Screen (12V Out) Choose "On", the down/up move of electronic screen will be related with power on/off of Projector. Test Pattern Display a test pattern. Security Refer next page. Reset Choose "Yes" to return the parameters on all menus to the factory default settings. 29 English - Optoma W307UST | User's Manual - Page 30
to use security verification when turning on the projector. `` Off: Choose "Off" to be able to switch on the projector without password verification. Change Password `` First password is entered for 3 times, the projector will automatically shut down. `` If you have forgotten your password, please contact - Optoma W307UST | User's Manual - Page 31
User Controls Volume Volume Mute Off Volume Microphone Volume Select Enter Exit Mute `` Choose "On" to turn mute on. `` Choose "Off" to turn mute off. Volume `` Press the ◄ button to decrease the volume. `` Press the ► button to increase the volume. Microphone Volume `` Press the ◄ button - Optoma W307UST | User's Manual - Page 32
Input Auto Power Off (min) Lamp Settings Dynamic Black High Altitude Filters Remind (Hour) Information Default On On Off Select Enter Exit Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on. `` Default - Optoma W307UST | User's Manual - Page 33
countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has finished (in minutes). Lamp Settings Refer to page 34. Dynamic Black `` On: The pictures with the optimum contrast will be - Optoma W307UST | User's Manual - Page 34
`` Off: Choose "Off" to hide the lamp end of life warning message. Lamp Power Mode `` Normal: Normal mode. `` ECO: Use this function to dim the projector lamp which will lower power consumption and extend the lamp life. Clear Lamp Hours Choose "Yes" to reset the lamp hour counter after replacing the - Optoma W307UST | User's Manual - Page 35
3D Invert Off 3D Format 1080p@24 Select Enter Exit ™™"Frame Sequential" is supported the DLP Link 3D input signals from VGA / HDMI connector. ™™"Frame Sequential" / "Field Sequential" are supported the HQFS 3D input signals from Composite/S-video connector connector. ™™"Frame Packing" / "Side - Optoma W307UST | User's Manual - Page 36
graphic source from HDMI/VGA input. Other sources are not supported. ™™If "3D" or "Dynamic Black" function is enabling need to unplug the Mini USB cable that connects NB/desktop with the projector before using the Interactive function. After you complete the Interactive Settings in OSD, use - Optoma W307UST | User's Manual - Page 37
Select Enter Exit LAN Settings `` DHCP: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired when you select DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gateway. Use ▲ or ▼ to select the number of IP - Optoma W307UST | User's Manual - Page 38
to allow a DHCP server to automatically assign an IP, or manually enter the required network information. LAN Settings DHCP IP Address to enter the IP address. You can now access Web Management and manage the projector from a remote location. 333 Based on network web-page for the input-string in - Optoma W307UST | User's Manual - Page 39
Step 1: Find an IP Address (192.168.10.100) from LAN function of projector. Step 2: To open Network Connections, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. Click the connection you want - Optoma W307UST | User's Manual - Page 40
(up to 21 characters for each field). Press Save to store the settings. `` Choose DHCP to assign an IP address to the projector from a DHCP server automatically, or Manual to assign an IP address manually. `` Set up the IP Address, Device ID and Port information on the Crestron function. English 40 - Optoma W307UST | User's Manual - Page 41
be set to Off(0) or 1~120 minutes. See "Auto Power Off (min)" function. `` Alert Status: There are three error status: Lamp warning, Low lamp life, and Temperature warning. Your projector might lock up in protection mode if any of the alerts is activated. To exit protection mode, click the Clear to - Optoma W307UST | User's Manual - Page 42
User Controls E-mail Setting Page `` E-mail Alert: You can set whether to be notified by email (Enable) or not (Disable). `` To/Cc/From: You can enter email address of sender (From) and recipients (To/Cc) to receive notification when an abnormality or warning occurs. `` Out going SMTP server, User - Optoma W307UST | User's Manual - Page 43
then Submit. `` Login page of Web Management: ™™Contact Service Center if you forget your administrator password. Login Page Web Management Welcome to Web Management. Administrator Password: Login Projector Information Projector Name: IP Address: D21211 192.168.0.100 `` Administrator Password - Optoma W307UST | User's Manual - Page 44
Appendices Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. No image appears on-screen `` Ensure all the cables and power connections are correctly and securely - Optoma W307UST | User's Manual - Page 45
Display Arrangement Mirror display yy If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector. T he screen of the Notebook or PowerBook computer is not displaying your presentation Some Notebook PCs may deactivate their own - Optoma W307UST | User's Manual - Page 46
the display mode of your graphic card to make it compatible with the product. Image is out of focus `` Adjust the "Focus Ring" on the projector lens. `` Make sure the projection screen is within the required distance. Refer to Page 17. T he image is stretched when displaying 16:9 DVD title When - Optoma W307UST | User's Manual - Page 47
may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp" section on pages 49. Remote Control Problems If the remote control does not work `` Check the operating - Optoma W307UST | User's Manual - Page 48
- Side(Half)" for input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on page 54. Image does not display in 3D `` Check if Side-bySide(Half)" for input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on page 54. On Screen Messages `` Power off confirm Power Off? - Optoma W307UST | User's Manual - Page 49
useful life Replacement suggested! not be turned on if the lamp cover has not been placed When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. back on the projec- Make sure the projector has been cooled down for at least 60 tor - Optoma W307UST | User's Manual - Page 50
, proper maintenance will prevent overheating and related damage to the projector. When you see this message, please find following steps for cleaning procedure: 2 1 Lamp Replacement Procedure: 1. Switch off the projector power by pressing the " " button. 2. Disconnect the power cord. 3. Pull - Optoma W307UST | User's Manual - Page 51
Appendices Compatibility Modes yy VGA Analog -- PC signal Modes Resolution 640x480 640x480 VGA 640x480 640x480 640x480 640x480 IBM 720x400 800x600 800x600 SVGA 800x600 800x600 800x600 800x600 Apple, MAC II 832x624 1024x768 1024x768 XGA 1024x768 1024x768 1024x768 Apple, MAC - Optoma W307UST | User's Manual - Page 52
Appendices Modes QuadVGA SXGA+ UXGA Resolution 1280x960 1280x960 1400x1050 1600x1200 V. Frequency [Hz] 60 75 60 60 -- Extended wide timing Modes Resolution 1280x720 WXGA 1280x800 1366x768 1440x900 WSXGA+ 1680x1050 V. Frequency [Hz] 60 60 60 60 60 -- Component signal Modes Resolution - Optoma W307UST | User's Manual - Page 53
yy HDMI Digital -- PC signal Modes VGA IBM SVGA Apple, MAC II XGA Apple, MAC II SXGA QuadVGA SXGA+ UXGA Resolution 640x480 640x480 640x480 640x480 640x480 640x480 720x400 800x600 800x600 800x600 800x600 800x600 800x600 832x624 1024x768 1024x768 1024x768 1024x768 1024x768 1152x870 1280x1024 - Optoma W307UST | User's Manual - Page 54
Appendices -- Extended wide timing Modes WXGA WSXGA+ Resolution 1280x720 1280x800 1366x768 1440x900 1680x1050 V. Frequency [Hz] 60 60 60 60 60 H. Frequency [Hz] 44.8 49.6 47.7 59.9 65.3 -- Video signal Modes 480p 480i 576i 480p 576p 720p 720p 1080i 1080i 1080p 1080p 1080p Resolution 640x480 - Optoma W307UST | User's Manual - Page 55
FIFO: Disable UFlAofowRTrC1oINFoOinn:eDAisaSblCe II Projector Return (Pass): P Procjoecdtoer R.eturn (Pass): P Projector Return (Fail): F Projector Return (Fail): F XX=00 is for all projectors SEND to projector 232 ASCII Code 307UST Code Function Description - Optoma W307UST | User's Manual - Page 56
31 34 30 20 32 30 0D Menu ~XX140 29 7E 30 30 31 34 30 20 32 39 0D Source READ from projector 232 ASCII Code HX3070U Code Function Projector Return Description ~XX121 1 7E 30 30 31 32 31 20 31 0D Input Source(curr. src) OKn n : 0/2/3/5/4/7 = None / VGA1 / VGA2 / Video - Optoma W307UST | User's Manual - Page 57
If you wish to use a third party ceiling mount kit, please ensure the screws which are used to attach a mount to the projector meet the following specifications: Screw type: M4*4 Diameter: 4 mm Length: 11 mm ™™Please note that damage resulting from incorrect installation will invalidate - Optoma W307UST | User's Manual - Page 58
Global Offices For service or support please contact your local office. USA 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com 888-289-6786 510-897-8601 [email protected] Canada 3178 Laurelview Ct. Fremont, CA 94538, USA www.optomausa.com Latin America 3178 Laurelview Ct. Fremont - Optoma W307UST | User's Manual - Page 59
Taiwan 12F., No.215,Sec. 3, Beixin Rd., +886-2-8911-8600 Xindian Dist., New Taipei City 231, +886-2-8911-6550 Taiwan, R.O.C. [email protected] www.optoma.com.tw asia.optoma.com Hong Kong Unit A, 27/F Dragon Centre, 79 Wing Hong Street, Cheung Sha Wan, Kowloon, Hong Kong +852-2396-8968 - Optoma W307UST | User's Manual - Page 60
Notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to comply with the limits for a energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is - Optoma W307UST | User's Manual - Page 61
2004/108/EC (including amendments) • Low Voltage Directive 2006/95/EC • R & TTE Directive 1999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
 |
 |
1
English
Table of Contents
............................
1
Usage Notice
...................................
2
Safety Information
...............................
2
Precautions
.........................................
3
Eye Safety Warnings
..........................
5
Product Features
................................
5
Introduction
......................................
7
Package Overview
..............................
7
Product Overview
...............................
8
Main Unit
..............................................
8
Control Panel
.......................................
9
Input/Output Connections
..................
10
Remote Control
..................................
11
Installation
.....................................
12
Connecting the Projector
..................
12
Connect to Computer/Notebook
........
12
Connect to Video Sources
.................
13
Powering On/Off the Projector
..........
14
Powering On the Projector
.................
14
Powering Off the Projector
.................
15
LED Indicator Messages
....................
15
Adjusting the Projected Image
..........
16
Adjusting the Projector’s Height
........
16
Adjusting the Projector’s Zoom /
Focus
.................................................
17
Adjusting Projection Image Size
........
17
User Controls
................................
18
Using the Control Panel
....................
18
Using the Remote Control
................
19
Remote Control Battery Installation ... 20
On-screen Display Menus
................
21
How to operate
.................................
21
Menu Tree
..........................................
22
Picture
................................................
24
Screen
...............................................
26
Setting
................................................
28
Setting | Security
................................
30
Volume
...............................................
31
Options
..............................................
32
Options | Lamp Settings
....................
34
3D
......................................................
35
Interactive
..........................................
36
LAN
....................................................
37
Web Management
.............................
38
Appendices
....................................
44
Troubleshooting
................................
44
Projector Problems
............................
47
Remote Control Problems
.................
47
Sound Problems
................................
47
3D Problems
......................................
47
On Screen Messages
........................
48
Replacing the lamp
...........................
49
Replacing and cleaning the optional
dust filter
...........................................
50
Compatibility Modes
.........................
51
RS232 Protocol Function List
............
55
Ceiling Mount Installation
..................
57
Optoma Global Offices
.....................
58
Regulation & Safety Notices
.............
60
Table of Contents