Optoma W307UST User's Manual - Page 48
On Screen Messages, Two images, Side-by-SideHalf format, Image does not display in 3D
View all Optoma W307UST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Appendices T wo images, Side-by-Side(Half) format `` Select "3D" --> "3D Format" from OSD and choose "Side-by- Side(Half)" for input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on page 54. Image does not display in 3D `` Check if the battery of 3D glasses is drained. `` Check if the 3D glasses is turned on. `` Select "3D" --> "3D Format" from OSD and choose "Side-bySide(Half)" for input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on page 54. On Screen Messages `` Power off confirm Power Off? Press power key again. `` Fan lock error Warning! FAN LOCKED The proejctor will switch off automatically. `` No source found VGA 1 No Source Found `` Out of display range VGA Out of display range `` Over temperature Warning! TEMPERATURE TOO HIGH Please: 1. Make sure air in and outlets are not blocked. 2. Make sure the environment temperature is under 40 degree C. English 48