Optoma W307UST User's Manual - Page 46
Image is too small or too large, Image has slanted sides
View all Optoma W307UST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Appendices Image has vertical flickering bar `` Use "Clock" to make an adjustment. Refer to the "Screen" section for more information. `` Check and reconfigure the display mode of your graphic card to make it compatible with the product. Image is out of focus `` Adjust the "Focus Ring" on the projector lens. `` Make sure the projection screen is within the required distance. Refer to Page 17. T he image is stretched when displaying 16:9 DVD title When you play anamorphic DVD or 16:9 DVD, the projector will show the best image in 16: 9 format on projector side. `` If you play 4:3 format DVD title, please change the format as 4:3 in projector OSD. `` If the image is still stretched, you will also need to setup the display format as 16:9 (wide) aspect ratio type on your DVD player. Image is too small or too large `` Move the projector closer to or further from the screen. `` Press "Menu" on the remote control or on the control panel. Go to "Screen" --> "Aspect Ratio"and try the different settings. Image has slanted sides: `` If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen. `` Use "Screen" --> "V Keystone" from the OSD to make an adjustment. Image is reversed `` Select "Screen" --> "Ceiling Mount" from the OSD and adjust the projection direction. English 46