Optoma W460 W460 User Manual - Page 69

Telnet commands, AMX device discovery commands, Lead Code, Projector ID, Command ID, Space, Variable

Get Optoma W460 PDF manuals and user guides View all Optoma W460 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

APPENDICES Telnet commands ‡‡ Port: support 3 ports of 23/1023/2023 ‡‡ Multi-connections: Projector could receive commands from different ports at the same time ‡‡ Command Format: Follow RS232 command format (support both of ASCII and HEX) ‡‡ Command Response: Follow RS232 return message. Lead Code Standby State ~ Fix code One Digit~ Projector ID   00 Command ID Space    Defined by Optoma 2 or 3 Digit. See the Follow content One Digit Variable Carriage Return n CR Per item Definition Fix code One Digit Note: For wide screen resolution (WXGA), the compatibility support is dependent on Notebook/PC models. AMX device discovery commands ‡‡ DP: 239.255.250.250 ‡‡ Port No.: 9131 ‡‡ Each UDP broadcast information as below are updated around 40 seconds Command Device-UUID Device-SKDClass Device-Make Device-Model Config-URL Revision Description MAC address (Hex value without' ':' separator) The Duet DeviceSdk class name Maker name Model name Device's IP address LAN IP address is shown up if LAN IP address is valid. Wireless LAN IP address is shown up if Wireless LAN IP address is valid. The revision must follow a major.minor.micro scheme. The revision is only increased if the command protocol is modified. Remark (Parameter) 12 digits VideoProjector MakerPXLW Projector http://xxx.xxx.xxx.xxx/index.html 1.0.0 Note For wide screen resolution (WXGA), the compatibility support is dependent on Notebook/PC models. This AMX function is only to support AMX Device Discovery. The broadcast information only send out through valid interface. Both LAN and Wireless LAN interfaces could be supported at the same time. If "Beacon Validator" was used. Please take care below information. English 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
English
69
APPENDICES
Telnet commands
±
Port: support 3 ports of 23/1023/2023
±
Multi-connections: Projector could receive commands from different ports at the same time
±
Command Format: Follow RS232 command format (support both of ASCII and HEX)
±
Command Response: Follow RS232 return message.
Lead Code
Projector ID
Command ID
Space
Variable
Carriage Return
Standby State
~
n
CR
Fix code One Digit~
00
Defined by Optoma 2 or 3 Digit.
See the Follow content
One Digit
Per item Definition
Fix code One Digit
Note°
For wide screen resolution (WXGA), the compatibility support is dependent on Notebook/PC models.
AMX device discovery commands
±
DP: 239.255.250.250
±
Port No.: 9131
±
Each UDP broadcast information as below are updated around 40 seconds
Command
Description
Remark (Parameter)
Device-UUID
MAC address (Hex value without’ ‘:’ separator)
12 digits
Device-SKDClass
The Duet DeviceSdk class name
VideoProjector
Device-Make
Maker name
MakerPXLW
Device-Model
Model name
Projector
Config-URL
Device’s IP address
LAN IP address is shown up if LAN IP address is valid.
Wireless LAN IP address is shown up if Wireless LAN IP address is valid.
Revision
The revision must follow a major.minor.micro scheme. The revision is only
increased if the command protocol is modified.
1.0.0
Note°
±
For wide screen resolution (WXGA), the compatibility support is dependent on Notebook/PC models.
±
This AMX function is only to support AMX Device Discovery.
±
The broadcast information only send out through valid interface.
±
Both LAN and Wireless LAN interfaces could be supported at the same time.
±
If “Beacon Validator” was used. Please take care below information.