Panasonic 55 Professional Display for Entry-Level Digital Signage Quick Start - Page 11
Connections
View all Panasonic 55 Professional Display for Entry-Level Digital Signage manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Connections AC cord connection and fixing Back of the unit Cable fixing Note ● 3 clampers are supplied with this unit. Fix the cables at 3 locations using the holes of clampers as shown below. If you need more clampers, purchase them from your dealer. (Available from the customer service) 55-inch model AC cord fixing AC cord (supplied) Plug the connector into the display unit. Plug the AC cord until it clicks. Note ● Make sure that the AC cord is locked on both the left and right sides. Unplug the AC cord ● The position of the holes are the same for 42-inch and 49-inch models. 1. Attach the clamper hole Insert the clamper in a hole. To remove from the unit: snaps Keep pushing both side snaps 2. Bundle the cables Unplug the connector pressing the two knobs. Note ● When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet first. ● The supplied AC cord set is for this unit exclusive use. Do not use this for other purposes. hooks To loosen: Set the tip in the hooks Keep pushing the knob knob English 11