Panasonic 55 Professional Display for Entry-Level Digital Signage Quick Start - Page 13
Before connecting
View all Panasonic 55 Professional Display for Entry-Level Digital Signage manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
11 IR IN, IR OUT: 12 SERIAL IN, SERIAL OUT: Infrared Signal Input / Output Terminal Use this when operating more than one display with one remote control. SERIAL Input / Output Terminal Control the Display by connecting to PC. Before connecting ● Before connecting cables, carefully read the operating instructions for the external device to be connected. ● Turn off the power of all devices before connecting cables. ● Take note of the following points before connecting the cables. Failure to do so may result in malfunctions. • When connecting a cable to the unit ora device connected to the unit itself, touch any nearby metallic objects to eliminate static electricity from your body before performing work. • Do not use unnecessarily long cables to connect a device to the unit or to the unit body. The longer the cable, the more susceptible to noise it becomes. Since using a cable while it is wound makes it act like an antenna, it is more susceptible to noise. • When connecting cables, connect GND first, then insert the connecting terminal of the connecting device in a straight manner. ● Acquire any connection cable necessary to connect the external device to the system that is neither supplied with the device nor available as an option. ● If the outer shape of the plug of a connection cable is large, it may come in contact with the plug of an adjacent connection cable. Use a connection cable with the suitable plug size for the terminal alignment. ● If video signals from video equipment contain too much jitter, the images on the screen may wobble. In this case, a time base corrector (TBC) must be connected. ● When the sync signals output form PC or video equipment are disturbed, for example, when changing settings of video output, the colour of the video may be disturbed temporarily. ● The unit accepts Composite video signals, YCBCR/ YPBPR signals, analogue RGB signals and digital signals. ● Some PC models are not compatible with the unit. ● Use cable compensator when you connect devices to the unit using long cables. Otherwise the image may not display properly. English 13