Panasonic AG-DVX100A Digital Video Record - Page 25
VIEWFINDERS, Using the viewfinder
UPC - 791871302378
View all Panasonic AG-DVX100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Viewfinders This camera recorder has two viewfinders: a viewfinder that uses a small LCD, and a 3.5inch LCD monitor. Use the one that better suits the application and the shooting conditions concerned. OThe brightness and color tones may differ between the images in the viewfinder and on the LCD monitor and the images on a TV monitor. Use the TV monitor when performing the final check of the images. Using the viewfinder 1 Set the POWER switch on the camera recorder to ON, and check that an image appears in the viewfinder. OKeep the LCD monitor closed. 2 Position the viewfinder where its screen images can be seen most comfortably. OThe viewfinder can be raised perpendicularly up to angle of about 90 degrees. 3 Adjust the diopter adjustment dial in such a way that the characters on the viewfinder screen come into sharp focus. Diopter adjustment dial Eye-piece 4 Select YES as the setting for the EVF SET item on the setting menu DISPLAY SETUP screen. OFor details on the menu operations, refer to page 39. 5 Select the EVF COLOR LEVEL item, tilt the OPERATION lever in the 3 or 4 direction, and adjust the color level of the screen. (If the remote control unit is used, press the "M" button among the SET buttons.) EVF SET EVF COLOR LEVEL EVF BRIGHTNESS EVF CONTRAST PUSH MENU TO RETURN 6 Select the EVF BRIGHTNESS item, and tilt the OPERATION lever in the 3 or 4 direction to adjust the screen's brightness. (If the remote control unit is used, press the "M" button among the SET buttons.) EVF SET EVF COLOR LEVEL EVF BRIGHTNESS EVF CONTRAST PUSH MENU TO RETURN Do not point the viewfinder's eye-piece at the sun. This may damage the internal parts. 7 Select the EVF CONTRAST item, tilt the OPERATION lever in the 3 or 4 direction, and adjust the contrast of the screen. (If the remote control unit is used, press the "M" button among the SET buttons.) EVF SET EVF COLOR LEVEL EVF BRIGHTNESS EVF CONTRAST PUSH MENU TO RETURN 25