Panasonic AW-HE100 Menu Operations - Page 10

Setting the menu items Setting the menu items When the unit's settings are to be selected, the menus are displayed on the monitor. The monitor is connected to the video signal output connector (VIDEO OUT connector or HD/SD ANALOG connector). The basic menu operations involve displaying sub-menus from the main menu items, and selecting settings on the sub-menus. Some sub-menus have menu items for performing more detailed settings. For details on the basic operations to display the menus and change the items using the accessory wireless remote control or controller (AW-RP655, AW-RP555 or AW-RP400), refer to pages 40 to 47. Main menu  HE100 menu  1-------- Pan Tilt Head Setting 2-------- Camera Setting 1 Pan Tilt Head Setting menu display 2 Camera Setting menu display Pan-tilt head unit setting menu  Pan Tilt Head Setting  3-------- Tally 4-------- Landing 5-------- Install Position 6-------- Smart Picture Flip 7----------Flip Detect Angle 8-------- Controller On Soft Desktop Auto 90 All 9------ Initialize ------ Return 3 Tally lamp use selection [Tally: On, Off] (Factory setting: On = controlled) Using this item, set the function for having the tally lamp lighted or extinguished by the tally control signal to ON or OFF. 4 Landing selection [Landing: Soft, Just] (Factory setting: Soft = Soft landing) Using this item, select "Soft" or "Just" (exact) as the landing characteristics. The level of vibration accompanying the acceleration or deceleration initiated by the stop operation is less at the "Soft" setting than at the "Just" (exact) setting. 5 D esktop (stand-alone) installation/ Hanging (suspended) installation selection [Install Position: Desktop, Hanging] (Factory setting: Desktop) Using this item, select stand-alone (Desktop) or suspension from an overhead surface (Hanging) as the manner in which the unit is to be installed. Desktop: Stand-alone installation Hanging: Installation where the unit is suspended from an overhead surface 6 A utomatic picture flipping selection [Smart Picture Flip: Auto, Off] (Factory setting: Off = no flipping) Using this item, select the function for flipping the picture when tilting reaches the specified angle to ON or OFF. 7 T ilt angle at which automatic picture flipping starts [Flip Detect Angle: 60 to 120] (Factory setting: 90°) Using this item, select the tilt angle at which the picture is flipped when "Auto" has been selected as the automatic picture flipping selection [Smart Picture Flip] setting. 8 A ccept control from control device selection [Controller: All, RP, Option, RP/Option] (Factory setting: All = All control devices) All: All control devices (Including accessory wireless remote control) RP: Controller only Option: Expansion board only RP/Option: Controller and expansion board  At the point when this item's setting is changed, the new setting is not reflected in operation. It is reflected when the unit is set to the standby mode and its power is turned on. 48