Panasonic AW-HE100 Menu Operations - Page 6

When the camera is to be controlled from the AW-RP555 controller - manual

Page 6 highlights

Basic menu operations When the camera is to be controlled from the AW-RP555 controller Press the [MENU] button for two seconds. The camera menu becomes available for operation. [MENU]: Opens the menu and also scrolls up the item list. [ITEM]: Scrolls down the item list. [YES]: Confirms the item selection and also changes a set value in the positive direction. [NO]: Changes a set value in the negative direction. Each time the [EXT(AF)] button is pressed, the mode switches between Auto Focus and Manual Focus. The [EXT(AF)] button lights when the camera is in the Auto Focus mode. These buttons cannot be used for controlling the AW-HE100. 1 Press one of the [1] to [5] buttons of [CONTROL] to select the unit which is to be operated. 2 Press the [MENU] button for two seconds. The main menu is displayed on the monitor. 3 Press the [MENU] or [ITEM] button to make the item to be selected blink. Press the [MENU] button to scroll up the item list. Press the [ITEM] button to scroll down the item list. 4 Press the [YES] button. The sub-menu of the selected item is displayed. (Some sub-menu items have a sub-menu of their own.) 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

44
Basic menu operations
When the camera is to be controlled from the AW-RP555 controller
Press the [MENU] button for two seconds. The camera menu becomes available for operation.
[MENU]:
Opens the menu and also scrolls up the item list.
[ITEM]:
Scrolls down the item list.
[YES]:
Confirms the item selection and also changes a set value in the positive direction.
[NO]:
Changes a set value in the negative direction.
Each time the [EXT(AF)] button is pressed,
the mode switches between Auto Focus and
Manual Focus. The [EXT(AF)] button lights
when the camera is in the Auto Focus mode.
These buttons cannot be used
for controlling the AW-HE100.
1
Press one of the [1] to [5] buttons of [CONTROL] to select the unit which is to be operated.
2
Press the [MENU] button for two seconds.
The main menu is displayed on the monitor.
3
Press the [MENU] or [ITEM] button to make the item to be selected blink.
Press the [MENU] button to scroll up the item list.
Press the [ITEM] button to scroll down the item list.
4
Press the [YES] button.
The sub-menu of the selected item is displayed.
(Some sub-menu items have a sub-menu of their own.)