Panasonic AW-HE100 Menu Operations - Page 2

Basic menu operations Menus are displayed on the monitor when the unit's settings are to be selected. The monitor is connected to the video signal output connector (VIDEO OUT connector or HD/SD ANALOG connector). The basic menu operations involve displaying sub-menus from the main menu items, and selecting settings on the sub-menus. Some sub-menus have menu items for performing more detailed settings. The menu operations are conducted using the accessory wireless remote control. If a controller is connected, they can also be conducted using the controller.  It may be necessary to upgrade the controller's version in order to support the AW-HE100. For further details, consult with your dealer. Described below are the basic operations for changing the menu item settings using the accessory wireless remote control and controller (AW-RP655, AW-RP555 or AW-RP400/AW-CB400). Only the steps taken using the accessory wireless remote control will be described here for the operations conducted to select and set the items. For details of the operations conducted using the controller, substitute "controller" for "wireless remote control" when reading the basic operations. Also, refer to the Operating Instructions of the controller. Table of operations Menu operation Selecting the camera to be operated Displaying the main menu Selecting the items Displaying the sub-menus Returning to the previous menu Changing the settings Exiting the menu operations Remote control Press the [CAM1], [CAM2], [CAM3] or [CAM4] button. Press the [MENU] button for two seconds. Press the [] or [] button. Press the [] or [] button. Press the [] or [] button while "Return" is blinking. Press the [] or [] button. Press the [MENU] button for two seconds. Controller AW-RP655 AW-RP555 AW-RP400/AW-CB400 (The following operations are performed using the AW‑CB400.) Press one of the [1] to [5] buttons of [CONTROL/ PREVIEW MONITOR OUT SEL]. Press one of the [1] to [5] buttons of [CONTROL]. Press one of the [1] to [5] buttons of [CONTROL SELECT]. 1. P ress the [MENU] button. The display on the AW‑RP655's LCD panel changes to the menu mode. 2. T urn the jog dial (main), and display "CAMERA SETTING" Press the [MENU] button for on the LCD panel. two seconds. 3. P ress the [OK] button, and display "OPEN CAMERA MENU?  OK Key" on the LCD panel. 4.Press the [OK] button again. Press the [A] button of [OPTION SW] for two seconds. Turn the jog dial (L). Press the [MENU] or [ITEM] button. Press the [A] or [B] button of [OPTION SW]. Press the jog dial (L). Press the [YES] button. Press the [C] button of [OPTION SW]. Press the jog dial (L) while "Return" is blinking. Press the [YES] button while "Return" is blinking. Press the [C] button of [OPTION SW] while "Return" is blinking. Turn the jog dial (R). Press the [YES] or [NO] button. Press the [C] or [D] button of [OPTION SW]. Press the [MENU] button or [R/B GAIN/PED] button. Press the [MENU] button for two seconds. Press the [A] button of [OPTION SW] for two seconds. Note  Perform the menu operations and exit from the menus using the controller which displayed the main menu. If a menu operation has been performed or a menu has been exited using another controller, first display the main menu and exit from it using one controller, and then display the main menu and exit from it using the other controller. 40