Panasonic AW-HE100 Menu Operations - Page 11

Setting the menu items  The operation for turning on the unit's power can be performed from any control device regardless of what has been selected as this item's setting.  Other operations can also be performed from the control device used to perform the operation for turning on the unit's power. These operations take effect until the unit is next set to the standby mode and its power is turned on. Follow one of the procedures below if the item's setting is changed and the unit can no longer be operated from a specific control device.  When menu operations can be performed using another control device: First change the item using a control device capable of performing menu operations, and then turn off the unit's power and turn it back on.  When menu operations cannot be performed using other control devices: 1. Turn off the power of the units and devices that are connected. 2. Disconnect the unit's power cable, and plug it back in. 3. Perform the operation for turning on the unit's power from the control device that was no longer capable of performing the menu operations. 4. After changing this item, turn off the unit's power and turn it back on. 9 Initialization [Initialize] Using this item, the settings of all the items on the "Pan Tilt Head Setting" menu are returned to the factory settings. (Refer to the section on the right.)  R eturn to the previous menu (main menu) [Return] Concerning initialization When  "Initialize" is selected, the initialization confirmation screen is displayed for about 10 seconds. (Press the [] or [] button to make "Initialize" blink, and press the [] or [] button.)  Initialize  (Pan Tilt Head Setting) Do you want to initialize Pan Tilt Head settings? O.K. CANCEL Initialization confirmation screen When "O.K." is selected while the initialization confirmation screen is displayed, the screen shown below appears, and initialization is performed. (Press the [] or [] button to make "O.K." blink, and press the [] or [] button.) When initialization has been completed, the display returns to the "Pan Tilt Head Setting" menu. Pan Tilt Head Setting initialize When "O.K." is not selected or "CANCEL" is selected while the initialization confirmation screen is displayed, the screen shown below appears, and the display returns to the "Pan Tilt Head Setting" menu without performing initialization. Pan Tilt Head Setting unchanged 49