Panasonic AW-RP150GJ AW-RP150 Interface Specifications - Page 14

Remote Camera Controller 6. Command details Interface Specifications 6.1. Controller control Camera selection These commands switch the camera selection by specifying the port numbers, camera numbers and group numbers. Command name Category Table 6.1.1. Camera selection Control method Serial IP Command Data value Setting Remarks Camera switching control command (specifying the port numbers) Group switching control command Control Response Control Response Camera switching control command (specifying the camera numbers) Camera switching control command (specifying the group or the port numbers) Control Response Control Response ○ ○ XPT:[Data] 1 Port1 Up to Port5 for ～ ～ ○ RP60：－ XPT:[Data] AW-RP50 and RP150：－ 10 Port10 AW-RP60. RP120：－ RP50：○ ○ ○ XGP:[Data] 1 Group1 Up to Group10 ～ ～ ○ RP60：－ XGP:[Data] for AW-RP120. RP150：－ 20 Group20 RP120：－ Up to Group40 RP50：○ for AW-RP60. ○ ○ XCN:01:[Data] 1 CAM1 Up to CAM100 ～ ～ ○ RP60：－ XCN:01:[Data] for AW-RP50 RP150：－ 200 CAM200 and AW-RP120. RP120：－ RP50：○ ○ ○ XCN:02:[Data1] : [Data1] [Data1] Up to Port5 for [Data2] 1 Group1 AW-RP50. ～ ～ ○ RP60：－ XCN:02:[Data1] : RP150：－ RP120：－ RP50：○ [Data2] 20 Group20 [Data2] [Data2] 1 Port1 Up to Group10 for AW-RP120. ～ ～ Camera number confirmation command (inquiry selected camera number) Confirmation ○ Response ○ Camera Group/Port Confirmation ○ confirmation command Response ○ (inquiry selected camera Group/Port number) ○ XQC:01 10 Port10 - - Up to Group40 and Port1-5 for AW-RP60. ○ XQC:01:[Data] 0 Unselected Up to CAM100 1 CAM1 for AW-RP50 ～ ～ and AW-RP120 200 CAM200 ○ XQC:02 - - ○ XQC:02:[Data1] [Data1] [Data1] Up to Port5 for :[Data2] 1 Group1 AW-RP50. ～ ～ 20 [Data2] 0 1 Group20 [Data2] Unselected Port1 ～ ～ 10 Port10 Up to Group10 for AW-RP120. Up to Group40 and Port1-5 for AW-RP60. © Panasonic Corporation 2020 All Rights Reserved. - 14 -