Panasonic BL-C30A Network Camera - Page 28

Operating Instructions Basic (1) Network Configures the network settings such as connection mode to connect the camera to the network (see page 30). (2) Wireless Configures wireless network (see page 34). (3) UPnP Enables automatic port forwarding or shortcut to the camera (see page 37). (4) Viewnetcam. Registers with the Viewnetcam.com service (see page 38). com (5) Date and Time Sets the date and time, automatic time adjustment and adjust clock for daylight saving time settings (see page 40). (6) Camera Sets camera name, white balance, AC power source frequency and pan/tilt range (see page 42). Account (7) Administrator*1 Sets authentication setting and administrator security (user name and password) (see page 46). (8) General User*1 Sets general user security (user name and password) and general user's feature restriction (see page 50). Advanced (9) Image Display Sets resolution, image quality and refresh interval of Single Camera and Multi-Camera page, limit continuous motion JPEG*1, and language (see page 52). (10) Multi-Camera*1 Sets the camera IP address or host name, camera name on the Multi-Camera page (maximum 12 cameras) (see page 55). (11) Buffer/Transfer Sets image buffer or transfer by timer or sensor. (see page 57 or page 64). (12) Operation Time Sets time period to display camera images (see page 74). *1 If you change [Administrator], [General User], [Limit Continuous Motion JPEG] or [MultiCamera Setup page] settings, changes will not be applied to the video (Motion JPEG) viewers. Restart the camera to make changes applied to all video viewers. 28