Panasonic BL-C30A Network Camera - Page 41
NTP Network Time Protocol server synchronizes the, Click [Go to Date and Time
UPC - 037988809721
View all Panasonic BL-C30A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Operating Instructions Setting Description Time Setting • Select date and format (AM/PM or 24 H). These settings are used for image buffer/transfer, operation time and time stamps on the buffered image. But E-mail subject and file name by E-mail or FTP transfer uses only 24 h format. Automatic Time • Adjustment • • NTP (Network Time Protocol) server synchronizes the camera's internal clock. It adjusts automatically every day. Check the box to enable it. Set the NTP server IP address, set 4 digits (0-255) and 3 periods such as "192.168.0.253". But "0.0.0.0" and "255.255.255.255" are not available. Or set a host name (1-255 characters). Select your time zone. Note If the time is incorrect by more than one hour, Automatic Time Adjustment stops working to prevent malfunctions caused by a disguised NTP server. Adjust Clock for • Daylight Saving Time During the daylight saving time, the internal clock is turned forward an hour. The clock will shift one hour forward at the set time on the Start Day, and move back one hour at the set time on the End Day. Check the box to enable it. Note An "s" is put between date and time of time stamp when enabling this feature. The time stamp will be attached to the transferred images by the Image Transfer feature. 3. Click [Save] when finished. • New settings are saved. • When finished, "Success!" is displayed. 4. Click [Go to Date and Time page]. • The Date and Time page is displayed. Note Date and time settings become incorrect depending on the length of power-on time or the internal temperature. Using the Automatic Time Adjustment is recommended. [For assistance, please call: 1-800-272-7033] 41