Panasonic BL-C30A Network Camera - Page 36
< Bottom >, WIRED, WIRELESS, Switch - wireless camera
UPC - 037988809721
View all Panasonic BL-C30A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Operating Instructions Notes • Some wireless devices do not support the WEP 152 bit. • The camera supports only the open system authentication. If the router or access point is set to shared key authentication, set it to auto or open system. 4. Click [Save] when finished. • New settings are saved. • When finished, "Success!" is displayed. 5. Click [Go to Wireless configuration page]. • The Wireless page is displayed. 6. Set the switch to WIRELESS. Notes • It takes about 1 minute for the new settings to be effective. • It is not possible to access the camera simultaneously by both wired and wireless connection. • To communicate using wireless connection, set up the camera by using wired connection and set the switch from wired to wireless as shown below. • When you switch wired to wireless or vice versa, restart the camera. Some routers also may need to be restarted after switching. < Bottom > Switch WIRELESS WIRED 36