Panasonic BT-LH910GJ Operating Instructions - Page 52
D Assist Mode
View all Panasonic BT-LH910GJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
3D Assist Mode The unit is equipped with 3D assist mode to provide support for shooting with a rig-type 3D camera system. The 3D assist mode has the following functions. ■■Image input method: SIMULTANEOUS (simultaneous method)R Two types of image, one for the left eye (L) and one for the right eye (R), are input to the two SDI1 and SDI2 terminals. •• In 3D assist mode, the input is fixed to SDI1/SDI2 and the input line cannot be changed. •• An appropriate phase difference with the input signal of SDI2 is one that is up to ±15 µs using the input signal of SDI1 as the reference. •• If the input signal formats of SDI1 and SDI2 are not identical or only one of the signals is input, the screen display will black out. ■■Assist functions Assist Function Name Screen Indication Description MIRROR Side-by-side Inverts the left and right and top and bottom of SDI2 (R) image to enable the basic adjustments of a 3D camera to be made. (Half-mirror type supported) SHIFT Overlay Shifts SDI2 (R) image horizontally and vertically to enable the lens axis of the 3D camera to be checked. COMPARISON Side-by-side Displays a halftone marker on the inside. A subject captured with only the camera of the L or R can be checked. CONVERGENCE Normal 1 Switches the L/R images automatically or manually to enable screen display the convergence point to be checked. COLOR Overlay Overlays the L/R images on a checkerboard pattern to enable the brightness or color offset to be checked. ZOOM FOCUS Side-by-side Enlarges part of an image to enable the focus offset or zoom offset to be checked. VERTICAL Side-by-side Displays the horizontal line markers to enable the vertical offset to be checked. OVERLAY Overlay Displays the vertical line markers to enable the width of parallax to be checked. ■■How to switch to 3D assist mode Select [3D ASSIST] in "2D/3D ASSIST" of the main menu. 1 The MIRROR assist functions starts, and a status screen like the one shown in the figure on the rights appears. 1 Indicates the name of the assist function selected with 3D ASSIST - MIRRORSDI1(L): 1080/60i(L) SDI2(R): 1080/60i(R) adjusting knob 4. 2 3 2 Indicates the format of the signal input to SDI1. 3 Indicates the format of the signal input to SDI2. 4 4 Indicates the functions assigned to adjusting knobs 1 to 4. For the functions assigned to adjusting knobs 1 to 3, OFF MIRROR - MIRR - FUNC. the definitions vary by assist function. The setting value of each function is confirmed at the point in time when the corresponding adjusting knob is operated. (pages 54 to 58) Adjusting knob 1 - 4 When you switch the mode to 3D assist mode, statuses 1 to 3 are displayed. When you operate the function of 4 : If you press one of the adjusting knobs 1 to 4, statuses 1 to 3 disappear and status 4 is displayed. Status 4 continues to be displayed until the operation ends. When you end the operation of 4 : If you press the FUNCTION3 button, status 4 disappears and statuses 1 to 3 are displayed. 52