Panasonic BT-LH910GJ Operating Instructions - Page 55

3D Assist Mode (continued) CONVERGENCE (Convergence Check) This function is for checking the subject's position at a fixed screen position in order to determine the depth position of the main subject. Automatically or manually switch the SDI1 (L) image and SDI2 (R) image and then check the subject's position. Screen: Normal display of one screen MANU L SLOW CONV MODE MANUAL SPEED FUNC. •• The place at which the image does not change is the convergence point. •• If the camera adjustment (vertical or rotation direction position adjustment) is correct, the image at other than the convergence point will shift to the left/right target. The underlined values are factory preset setting values. Sub menu Operation MODE Knob1 (turn) Settings MANU AUTO Description Selects the switching method of the L side image and R side image. Manual switching Automatic switching MANUAL Knob2 (turn) L R SPEED Knob3 (turn) SLOW FAST Selects the image to display when the MODE menu is MANU. Image of L side Image of R side Selects the speed for when the MODE menu is auto switching. Every 1 second Every 4 frames (When 720P: Every 8 frames) COLOR (Color Check) This function overlays and displays the SDI1 (L) image and SDI2 (R) image on a checkerboard pattern in one screen to enable you to check the brightness offset and color differences Screen: Overlay L/R on one screen. If it is easy to see the borderline of the checkerboard pattern, the brightness or color of L/R images is offset. 128 SIZE Sub menu Operation SIZE Knob1 (turn) COLR － － FUNC. Settings 128 256 The underlined values are factory preset setting values. Description Selects the checkerboard grid size for when overlaying the image of the L side and image of the R side. The checkerboard grid consists of squares of 128 samples and 128 lines. The checkerboard grid consists of squares of 256 samples and 256 lines. 55