Panasonic DMC-FX5 Digital Still Camera-english/ Spanish - Page 106
Troubleshooting, Of The Writing Speed Of
UPC - 037988977581
View all Panasonic DMC-FX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Others [MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE WRITING SPEED OF THE CARD] • When you set the picture quality to [30fpsVGA] or [30fps16:9], we recommend using a high speed SD Memory Card with "10MB/s" or greater displayed on the package. • Depending on the type of SD Memory Card or SDHC Memory Card, recording may stop in the middle. [A FOLDER CANNOT BE CREATED] A folder cannot be created because there are no remaining folder numbers that can be used. (P93) Format the card after saving necessary data on a PC etc. (P91) If you execute [NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100. (P21) [PICTURE IS DISPLAYED FOR 4:3 TV]/ [PICTURE IS DISPLAYED FOR 16:9 TV] • The AV cable is connected to the camera. Press [MENU/SET] if you want to delete this message at once. • Select [TV ASPECT] in the [SETUP] menu to change the TV aspect. (P22) • This message also appears when the USB connection cable is connected to the camera only. In this case, connect the other end of the USB connection cable to a PC or a printer. (P92, 95) Troubleshooting If you return the menu settings to the initial settings at the time of purchase, the condition may improve. Select [RESET] in the [SETUP] menu. (P21) w Battery and power source 1: The camera cannot be operated even when it is turned on. • Is the battery inserted correctly? - Check the direction of the battery. (P14) • Is the battery sufficiently charged? - Use a battery that has been sufficiently charged. 2: The LCD monitor turns off while the camera is turned on. • Is power save mode (P20) or economy mode (P20) activated? - Press the shutter button halfway to cancel these modes. • Is the battery exhausted? - Use a battery that has been sufficiently charged. 3: The camera turns off immediately after it is turned on. • Is the battery charge insufficient to operate the camera? - Use a battery that has been sufficiently charged. - If you leave the camera on, the battery will be exhausted. Turn the camera off frequently by using power save mode (P20) etc. 106 VQT0Y19