Panasonic EW3006S Operating Instructions - Page 19
Movement, detection, function
View all Panasonic EW3006S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Movement detection function If movement is detected while measurement is being carried out and more pressure is applied by the pressure cuff, the OM mark will be displayed. • Please carry out blood pressure measurement again if the OM mark flashes or is lit. • If the hand or wrist to which the pressure cuff is attached is moved while measurement is being carried out (e.g. the wrist is moved suddenly), in some cases correct measurements may not be obtained. • When movement has been detected during measurement, the OM mark flashes when the blood pressure reading obtained during that measurement is displayed. (If this reading is saved, the OM mark will flash whenever it is recalled.) Movement Mark Explanation .A A o 'Pm. ' mmlig IU Flashing Movement has been detected. • The hand or wrist has been bent suddenly. The muscles around hand or wrist have been tensed. • The hand or wrist has been moved, etc. With correct posture, please take the measurement again after measurement has been completed (see pages 12-14). • A, r Lit Movement has been detected that will significantly affect the reading. • Significant movement has been detected. Movement has been detected repeatedly. • Significant hand or wrist movement has been detected, etc. Please take the measurement again (An E will appear on the display). * An E will also appear on the display in the following cases: • When the pressure cuff hook-and-loop fastener has become loose, etc. (Please see page 25 for further details.) * This function is designed to help you to take measurements accurately (see page 23). Even if the Movement mark is not displayed, we recommend that measurements be taken 2.3 times in a comfortable position in order to obtain an accurate reading. Remember to rest 5 minutes in between readings. (see pages 12-14 for correct position). 18