Panasonic EW3006S Operating Instructions - Page 22
Calling, readings, memory
View all Panasonic EW3006S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Calling up readings from memory Readings can be recalled after being saved without having to switch the unit on. Readings will not be displayed if they have not been saved. Fig. 11-a M/R Fig. 11-b Fig. 11-c M/R 1. Press the Memory/Recall button (Fig. 11-a). • The average reading of all recorded measurements is displayed. • The all mark will be displayed (Fig. 11-b). • When, for example, readings from 90 measurements have been saved the average of the readings from 90 measurements will be displayed. • If there is only 1 measurement recorded, CO mark will not be displayed. 2. Press the Memory/Recall button to display readings starting with from the most recent measurement. • Each time the Memory/Recall button is pressed readings are displayed in order of the most recent measurement (Fig. 11-c, 11-d). 3. Press the On/Off and Start button to switch off the unit. If you forget to switch off the unit it will do so automatically after approx. 30 seconds. Fig. 11-d $38 mamvp&ig 82 DIA. mmHg Pit 92 ID 42 Deleting all data stored in memory (1) Recall stored data using the Memory/Recall button. (2) Press the Memory/Recall button again and hold it (for approx. 3 seconds) until all readings are deleted. NOTE: Readings from individual measurements cannot be deleted. (3) If everything has been deleted, the C) mark and CO will be displayed. 21