Panasonic EW3006W Operating Instructions - Page 16
Measuring, Blood, Pressure
View all Panasonic EW3006W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Measuring Your Blood Pressure Fig. 6-a On/Off rt Fig. 6-b BBB 0 7ZIC SYS. BBB DIA. Pit eAPIBB E Fig. 6-c Fig. 6-d • • Be nSYrSie. 7ld1433. DIA. PA:.,rxne:2 Fig 6-e On/Off S_rt Relax during measurements. 1. Place the storage case under your arm. (Please see correct position for measurement on pages 12-14.) 2. Press the On/Off and Start button (Fig. 6-a). • Everything on the display will be shown for approx. 2 seconds, apart from the battery symbol (Fig. 6-b). • The cuff will begin to inflate automatically. Changing inflation speeds and operating sounds, occur during inflation and are a normal part of the measurements that are being performed at this time. • Once your pulse rate is detected, the IP mark will flash on the display (Fig. 6-c). 3. Blood pressure values together with pulse rate are displayed when the measurement is complete (Fig. 6-d). • The air in the pressure cuff is released automatically. • Displayed readings will flash (for approx. 6 seconds) when in the high blood pressure range. • The 1 mark will flash on the screen to indicate that readings may be recorded. (See page 20 for information on how to record blood pressure readings.) • The displayed pulse rate indicates the number of heartbeats per minute as calculated from the number of heartbeats recorded during the measurement. 4. Press the On/Off and Start button to switch off the unit (Fig. 6-e). • If you forget to switch the unit off, it will do so automatically after approx. 5 minutes. 15