Panasonic EW3006W Operating Instructions - Page 17
Flash, warning, system, hypertensive, readings
View all Panasonic EW3006W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Flash warning system for hypertensive readings If the measured values fall within the hypertension range, the reading displayed on screen flashes on and off to alert user. According to JNC 7 Classification, values consistently in excess of 140 mmHg (Sys.) and/or 90 mmHg (Dia.) are considered to constitute high blood pressure. Fig. 7 SYS. ill 9 mmH "`h ZI nr DIA. Fp" mmHg P;it,^2 :cr: Diastolic (mmHg) 90 80 Hypertension (Stage 1, Stage 2) Prehypertension Normal 120 140 (mmHg) Systolic • Blood pressure readings will flash for approx. 6 seconds when in the high blood pressure range (Fig. 7). Systolic blood pressure: 140 mmHg and over Diastolic blood pressure: 90 mmHg and over (Only when measurement is complete) When an Error Occurs During Measurement Fig. 8 0 71 E An E will appear on the display to indicate that measure- ment was unsuccessful and should be performed again (Fig. 8). Before performing another measurement, always press the On/Off and Start button to turn off the unit and make sure to allow a rest period of 4 to 5 minutes before starting again. Please consult your doctor without delay if the blood pressure indicator repeatedly draws attention to elevated blood pressure values. 16