Panasonic HDC SD9 Hd Sd Camcorder - Multi Language - Page 12

Quick Guide ∫ Charging the battery Charging lamp [CHARGE] A Lights up: Charging Goes off: Charging completed ≥ Operate the mode switch while at the same time pressing in the lock release button if changing from OFF to another mode. ≥ Status indicator B ≥ To turn off the power, set the mode switch to OFF. ∫ Inserting/removing an SD card 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Insert the battery into the battery charger by aligning the arrows. ∫ Inserting the battery SD CARD OPEN Open the LCD monitor and install the battery by inserting it in the direction shown in the figure. A Insert the battery until it clicks and locks. ∫ How to turn on the power Turn on the power by sliding the mode switch to or while pressing the lock release button A. Card access lamp [ACCESS] ≥ When this unit is processing data, the access lamp A lights up. 1 Set the mode switch to OFF. 2 Open the SD card cover while sliding the SD CARD OPEN lever B. 3 Insert/remove the SD card. ≥ When inserting an SD card, face the terminal side C in the direction shown in the illustration and press it straight in as far as it will go. ≥ When removing the SD card, press the center of the SD card and then pull it straight out. 4 Securely close the SD card cover. ≥ Securely close it until it clicks. ∫ Language selection 1) Press the MENU button, then select [LANGUAGE] and press the cursor button. 2) Select [English] and press the cursor button. 12 VQT1N45