Panasonic HDC-TM20-R Hd Video Camera - Page 49
Quick power - hdc red
UPC - 037988983735
View all Panasonic HDC-TM20-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
3 Open the LCD monitor. HDC-SD20 HDC-TM20 HDC-HS20 Quick power on (Only when recording to an SD card or built- in memory) The unit is put into recording pause approx. 1.9 seconds when the mode is set to from OFF. ≥ Start time will not shorten if there is no SD card inserted. Start time will be shorten if the [Built-in Memory] is selected in the [MEDIA SELECT], even if there is no SD card inserted. ¬ Change the mode to . 1 Select SD card as a media to record from the menu. (l 34) [MEDIA SELECT] # [SD CARD] The status indicator A lights red and the unit is put into recording pause ≥ Quick Start Standby Mode is canceled if jabout 5 minutes have elapsed jmode is set to junit is turned off ≥ Time for Quick Start will be more than 0.6 seconds slower when the digital cinema is used. ≥ It may take some time for Automatic White Balance to adjust. ≥ In the Quick start mode, the zoom magnification becomes 1k. ≥ If [ECONOMY] (l 36) is set to [5 MINUTES] and the unit automatically goes into Quick Start Standby Mode, close the LCD monitor and then open it again. ≥ Quick Start Standby Mode cannot be released by the remote control. Turn the mode to OFF when powering off. 2 Select the menu. (l 34) [SETUP] # [QUICK POWER ON] # [ON] ≥ This function's default setting is [ON]. ≥ In the Quick power on mode, the zoom magnification becomes 1k. 49 VQT1Y00