Panasonic KV-S1015C Operating Instructions - Page 35
When the paper is thin, it may not be fed properly due to curls in the paper. In that case, press
View all Panasonic KV-S1015C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
4. Place the documents on the feed tray with the side to be scanned facing down. • Set the leading edge of documents as shown in the illustration (A). Operation 1 Note • • • Place the documents as shown in the illustration. The height of all the documents on the tray should be less than 5 mm. Exceeding this height might cause paper jams or skewing. When the paper is thin, it may not be fed properly due to curls in the paper. In that case, press the front part of the exit support (A) to use the exit support. 1 Operating Manual 35
4.
Place the documents on the feed tray with the side to be scanned facing down.
•
Set the leading edge of documents as shown in the illustration (
A
).
1
Note
•
Place the documents as shown in the illustration.
•
The height of all the documents on the tray should be less than 5 mm.
Exceeding this height might cause paper jams or skewing.
•
When the paper is thin, it may not be fed properly due to curls in the paper. In that case, press the
front part of the exit support (
A
) to use the exit support.
1
Operating Manual
35
Operation