Panasonic KX-PRW130W KX-PRW130W Owner's Manual - Page 31
Other programming, Answering the baby monitor, Changing the handset name, Calendar/Schedule
View all Panasonic KX-PRW130W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Editing an outside monitoring number 1 Press MMenuN on the handset being monitored. 2 MbN: "On/Off" a MSelectN 3 MbN: "On" a MSelectN 4 MbN: Select the outside line. a MEditN 5 MMenuN a MbN: "Edit" a MSelectN 6 Edit the name if necessary. a MOKN 7 Edit the phone number if necessary. a MOKN a MSelectN Erasing an outside monitoring number 1 Press MMenuN on the handset being monitored. 2 MbN: "On/Off" a MSelectN 3 MbN: "On" a MSelectN 4 MbN: Select the outside line. a MEditN 5 MMenuN a MbN: "Erase" a MSelectN 6 MbN: "Yes" a MSelectN a MOFFN Baby monitor sensitivity You can adjust the sensitivity of the baby monitor. Increase or decrease the sensitivity to adjust the sound level needed to trigger the baby monitor feature. R This feature cannot be set during a monitoring call. 1 Press MMenuN on the handset being monitored. 2 MbN: "Sensitivity level" a MSelectN 3 MbN: Select the desired setting. a MSaveN a MOFFN Answering the baby monitor n When monitoring with a handset: Press M N to answer calls. If you want to respond from the monitoring handset, press MMuteN. Programming R The monitoring handset will answer calls automatically when the auto intercom feature is set to "On" (page 16). Note: R If you receive an outside call when communicating with the monitored handset, you hear 2 tones. To answer the call, press MOFFN, then press M N. n When monitoring from an outside line: To answer a call, follow the operation for your phone. If you want to respond from the monitoring handset, press #1 using tone dialing. You can turn off the baby monitor feature by pressing #0. Note: R 2 minutes after the monitored handset starts a call, communication between the monitored handset and monitoring phone line is turned off automatically. Other programming Changing the handset name Each handset can be given a customized name ("Bob", "Kitchen", etc.). This is useful when you make intercom calls between handsets. You can also select whether or not the handset name is displayed in standby mode. The default setting is "No". If you select "Yes" without entering any handset name, "Handset 1" to "Handset 6" is displayed. 1 MMenuN (right soft key) #104 2 Enter the desired name (10 characters max.). 3 MSaveN 4 MbN: Select the desired setting. a MSelectN 2 times a MOFFN Calendar/Schedule You can program 20 schedule alarms for each handset using the calendar. A schedule alarm sounds at the set time for 1 minute. A text For assistance, please visit http://www.panasonic.com/help 31