Panasonic KX-TC1486B Cordles 900 Analog Phone - Page 33

Problem Cause and Remedy You cannot redial by pressing [PAUSE/REDIAL]. ≥When pressing [PAUSE/REDIAL] after [ /FLASH], more than 32 digits long number will not be redialed correctly. ≥When pressing after [ /FLASH] [PAUSE/REDIAL], more than 24 digits long number will not be redialed correctly. ≥The button functions as either redial or pause. It will redial the last number dialed if pressed at the outset of a call (p. 11). If another number has been dialed first, it will operate as a pause button (p. 26). "RECHARGE" and " " are displayed or the handset beeps intermittently. ≥Charge the battery fully (p. 8). While talking, the call is disconnected. ≥The battery needs to be recharged. Charge the battery fully (p. 8). You charged the battery fully, but "RECHARGE" and " " are still displayed. ≥Clean the charge contacts and charge again (p. 9). ≥The battery may need to be replaced. If you install a new battery, fully charge it (p. 30). The IN USE/CHARGE indicator light does not go out while charging. ≥This is normal. You cannot have a conversation using the handset. ≥When an optional headset is connected (p. 27), you must use the headset to talk with the caller. To have a normal cordless phone conversation, disconnect the headset. You cannot have a conversation using the headset. ≥Make sure that the optional headset is connected properly (p. 27). If you cannot solve your problem ≥Visit our website at: http://www.panasonic.com/support ≥Contact us via the web at: http://www.panasonic.com/contactinfo ≥Call our customer call center at: 1-800-211-PANA(7262) Useful Information For assistance, please call: 1-800-211-PANA(7262) 33