Panasonic KX-TG7733S User Manual - Page 10

TG77xx_(en)_QG.fm Page 10 Tuesday, November 22, 2011 9:34 AM Frequently asked questions Question Cause/solution Why is _ displayed? L The handset is too far from the base unit. Move closer. L The base unit's AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. L The handset is not registered to the base unit. Register it. 1 Handset: {MENU} (13) 2 Base unit: Press and hold {LOCATOR} for about 5 seconds until the registration tone sounds. 3 Handset: Press {OK}, then wait until a long beep sounds. Why am I unable to register a cellular phone to the base unit? L Depending on the compatibility of the cellular phone, you may not be able to register it to the base unit. For more information, please visit http://www.panasonic.com/link2cell L Confirm that the Bluetooth feature of your cellular phone is turned on. You may need to turn this feature on depending on your cellular phone. Why is there no dial tone? (cellular line) L Make sure that the CELL 1 or CELL 2 indicator lights green and the cellular phone is connected to the base unit. L The cellular phone has not been registered to the base unit. Register the cellular phone. How can I increase the handset volume level? L Press the volume key {+} repeatedly while talking. Why is the conversation noisy or cutting off? L Try to relocate the base unit so that distance to the handset is minimized. L If the same problem occurs even if the handset is next to the base unit, call Panasonic customer support at 1-800-211-PANA (1-800-211-7262). Can I add another accessory handset to my base unit? L Yes, you can add up to 6 handsets (including the handset(s) sold with your base unit) to a single base unit. L To purchase additional accessory handset(s) (KX-TGA470), please visit http://www.panasonic.com or call 1-800-332-5368. TTY users (hearing or speech impaired users) can call 1-866-605-1277. Can I keep the batteries charging all the time? L You can leave the handset on the base unit or charger anytime. This will not harm the batteries. How can I answer a call waiting call (2nd call)? L Press {CALL WAIT} when you hear the call waiting tone. For further registration information, visit http://www.panasonic.com/RegisterYourHandset - 10 -