Panasonic KX-TG7733S User Manual - Page 9

TG77xx_(en)_QG.fm Page 9 Tuesday, November 22, 2011 9:34 AM Using Bluetooth devices Using a Bluetooth wireless headset (optional) for landline calls By registering a Bluetooth headset to the base unit, you can have a hands-free conversation wirelessly for landline calls. L While someone is using a cellular line, the Bluetooth headset connection is not available. Registering a headset to the base unit 1 Your headset: Set your headset to registration mode. L Refer to your headset operating instructions. 2 Handset: {MENU} (621 To register to use the handset. Registration 3 Enter your headset PIN. L Typically, default PIN is "0000". Refer to the headset operating instructions. 4 Press {OK}, then wait until a long beep sounds. s {OFF} L When the HEADSET indicator on the base unit lights green, you are ready to use the headset. Operating a Bluetooth wireless headset using a landline Refer to your headset operating instructions for headset operations. N Answering landline calls with your headset To answer a landline call, turn on your headset referring to your headset operating instructions. When you finish talking, turn off your headset referring to your headset operating instructions. L If you cannot hang up the call using your headset; − press {„} (STOP) on the base unit. (KX-TG7731 series) − press {SP-PHONE} on the base unit 2 times. (KX-TG7741 series) N Switching between the base unit and your headset You can switch between the base unit and your headset: − during a landline call with the base unit speakerphone. (KX-TG7741 series) − during an intercom call between the base unit and handset. (KX-TG7741 series) − while listening to messages recorded on the base unit answering system.*1 KX-TG7741 series To switch to your headset: Press {HEADSET} on the base unit. To switch to the base unit: Press {SP-PHONE} on the base unit. *1 KX-TG7731 series L You can only switch from the base unit to your headset. Turn on the headset referring to your headset operating instructions. - 9 -