Panasonic KXPX10M KXPX10M User Guide - Page 21

Preparation Insert the paper cassette to the printer. Slide the paper cassette lid forward until it catches in place. Click Pull the paper stop upwards. 1 Slide the lid to align " " and " " marks. • If you do not slide the lid far enough, it will not attach properly to the printer. 2 Pull the paper stop upwards. Open the paper cassette compartment cover and insert the paper cassette firmly while holding the 3 unit. • Make sure that the positions of Firmly insert the " " and " " do not shift when as far as attaching the paper cassette. possible. Paper cassette compartment cover Important • Do not load more than 18 sheets of paper (or 20 sheets of wide size paper) in the paper cassette. • Be sure to remove printed paper before 10 or more sheets have piled up. • Do not touch the print surface (the plain, glossy side) or allow it to get dirty. Clear prints may become impossible if the print surface gets dirty, stained by fingerprints, or wet with water. • Do not bend or fold the paper or load it in the cassette with the reverse side facing upward. • Do not stretch the paper. This may lead to paper jam or prevent printing capability. • Do not remove the perforated section before printing. • Do not affix stamps or adhesive seals to the paper before printing. • Do not print on the paper with a word processor before printing with this printer. • Do not write on the paper before printing with this printer. • Do not remove unused sheets of paper from the paper cassette. Close the cassette lid, then insert the paper cassette into a plastic bag and store so that it lies flat. 21